LED light bar, single light, for surface and pendant mounting. Narrow, torsion-resistant profiled light bar with device carrier made of sheet steel, white (similar to RAL9016) or silver (SI, similar to RAL9006) resin-coated. LED carrier made of powder-coated extruded aluminum profile, clipped into the device carrier. Linear RIDI LED modules connected to the aluminum profile over the entire length using a patented fastening process for optimal, even heat dissipation. The LED modules are equipped with LEDs up to the LED carrier ends. Longitudinal optics made of extruded, impact-resistant, UV-resistant PMMA. Device carrier top with channel for external through-wiring, max. 3x1.5 mm or 8 mm. Two cable entries on the device carrier top. End pieces made of impact-resistant, UV-stabilized PC with a breakout opening in the luminaire, diameter 11 mm and a breakout opening in the groove on the top of the luminaire, width 8.5 mm. White luminaire version with white end pieces, silver luminaire version (SI) with dusty gray RAL7037 end pieces. LED linear modules equipped with mid-power LEDs for even illumination and maximum efficiency. Color tolerance 50,000 hours Linear optics with opal longitudinal prism trough for a slight indirect component and diffuse light distribution. Extruded trough profile made of PC with opal end pieces glued on both sides. Installation: Suitable for direct installation on normally flammable materials. Simple, cost-effective one-man installation with screws through the keyholes in the top of the luminaire or with flexible mounting distance using mounting clips (accessory). Mounting kits are available for pendulum mounting, see accessories.
| Property | Value |
| Max. System power: | 25 W |
| Nominal voltage: | 220 to 240 V |
| Rated luminous flux according to IEC 62722-2-1: | 3268 lm |
| Color temperature: | 4000 K |
| With control gear: | yes |
| With light source: | yes |
| Width: | 36 mm |
| Length: | 1188 mm |
| Housing color: | white |
| Suitable for number of lamps: | 1 |
| Operating device: | LED operating device, current-controlled |
| Protection type (IP): | IP20 |
| Protection class: | I |
| Light source: | LED not replaceable |
| Electrical connection with plug-in system: | no |
| With switch: | no |
| Material: | steel |
| Luminaire with limited surface temperature 'D-mark': | no |
| Covering of the luminaire with thermal insulation material possible: | no |
| Suitable for emergency lighting: | no |
| Type of voltage: | AC/DC |
| Light color: | white |
| Color rendering index CRI: | 80-89 |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | yes |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Energy efficiency class of the built-in light source: | A++, A+, A (LED) |
| With motion detector: | no |
| Height/depth: | 65 mm |
