Surface-mounted industrial luminaire, protection class IP66 for ceiling, pendant or mounting rail mounting. Sturdy luminaire housing made of die-cast aluminum, white, powder-coated, color similar to RAL9016. RIDI LED modules designed as a linear board, equipped with LEDs with increased resistance to harmful gases. Pane made of toughened safety glass (ESG), structured, attached to the housing with stainless steel fasteners and secured with screws. Wide-beam parabolic mirror louvre made of reflection-enhanced, high-gloss pure aluminum. Installation: ceiling surface mounting with appropriate accessories. Pendant mounting (chain or rope) with appropriate fastening sets, swing hooks (4 pieces) included. Mounting rail mounting with appropriate accessories. Ball-proof installation only with appropriately marked accessories.
| Property | Value |
| Max. System power: | 125 W |
| Rated luminous flux according to IEC 62722-2-1: | 19519 lm |
| Protection class: | I |
| Impact resistance: | IK09 |
| Protection class (IP): | IP66 |
| Housing color: | white |
| Color temperature: | 4000 K |
| Light source: | LED not replaceable |
| Length: | 415 mm |
| Width: | 415 mm |
| Height/depth: | 131 mm |
| With light source: | yes |
| Operating device: | LED operating device, current-controlled |
| Nominal voltage: | 220 to 240 V |
| DALI dimming: | no |
| Light color: | white |
| With control gear: | yes |
| Voltage type: | AC/DC |
| Material of the housing: | Aluminium |
| Ball-proof: | yes |
| Luminaire with limited surface temperature 'D-mark': | yes |
| Color rendering index CRI: | 80-89 |
| Light distribution: | symmetrical |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Di mming phase control: | no |
| dimming phase control: | no |
| dimming potentiometer (integrated into the device): | no |
| dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
