LED recessed light, single light for ceiling installation, for ceiling module 625. Sturdy light housing made of sheet steel, coated white (similar to RAL9016). Light guide held in the light housing with spring clips, can be folded down on both sides and automatically connected to the protective conductor. LED modules designed as surface boards. Mid-power LEDs for even illumination and maximum efficiency. LED driver built into the light housing. LED modules operate at protective extra-low voltage of less than 60 volts (SELV-compliant). Note LABS: These lights are suitable for use in paint processing companies outside the painting area or outside solvent processing areas. Protection class on the room side similar to IP40 and on the ceiling side IP20. MPO frame made of extruded aluminum profile with inserted transparent synthetic glass pane made of UV-resistant PMMA with microprism structure to reduce glare for screen-compatible workplace lighting, embossed prisms, external. Inside additional opal pane made of UV-resistant PMMA. Homogenously illuminated microprism panel. A DALI converter DT8 for separate control of the light colors (warm or cold white) with a DALI address. Control of the color temperature see APCON article or on request. Installation: Installation in various ceiling systems with corresponding fastening kit, or lay-in installation in ceiling systems with visible support rails and inserted ceiling panels. No additional fastening accessories are required for lay-in installation.
Property | Value |
Max. System power: | 32 W |
Rated luminous flux according to IEC 62722-2-1: | 3500 lm |
Suitable for number of lamps: | 2 |
Length: | 622 mm |
Width: | 622 mm |
Height/depth: | 60 mm |
Protection rating (IP): | IP20 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | no |
Nominal voltage: | 220 to 240 V |
Housing color: | white |
Housing material: | steel |
Color temperature: | 3000 to 6500 K |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | no |
Suitable for wall mounting: | no |
Voltage type: | AC |
With motion detector: | no |
With light source: | yes |
Light source: | LED not replaceable |
With operating device: | yes |
Cover material: | Opal plastic |
Without dimming function: | no |
Installation width: | 604 mm |
Light emission: | direct |
Light distribution: | symmetrical |
With light sensor: | no |
Operating device: | LED operating device, current-controlled |
Suitable for recessed mounting: | yes |
Light color: | white |
Suitable for computer workstations in accordance with EN 12464-1: | yes |
Suitable for strip light configuration: | no |
Suitable for pendant suspension: | no |
Suitable for surface mounting: | no |
Suitable for emergency lighting: | yes |
Installation length: | 604 mm |
DMX dimming: | no |
DSI dimming: | no |
With air slots: | no |
Dimming LineSwitch: | no |
Dimming potentiometer (device integrated): | no |
Dimming 0-10 V: | no |
Dimming GPRS: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | yes |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming depending on the operating device: | yes |
Suitable for lamp power: | 14 W |
Luminous efficacy: | 109 lm/W |