Surface-mounted LED damp-proof light for ceiling or pendant mounting. Protection class IP65, impact resistance IK09. Light housing made of co-extruded, impact-resistant, UV-stabilized polycarbonate. Light gray back of light, similar to RAL7035, light output opal on front of light. Device carrier made of white coated sheet steel. Equipped with LED modules. LED modules mounted directly on device carrier. Protection class I. Internal through-wiring, 3 x 1.5mm. Cable connection on both sides at the front using a twist lock. Radar sensor for motion detection built in. Mounting height for ceiling mounting max. 4m, for wall mounting max. 4m. Detection range for ceiling mounting max. 6m, for wall mounting max. 10m. The motion detector already has preset standard values and can be put into operation immediately after installation. The preset values can ONLY be changed using the optionally available remote control (item number: 0209373). Installation: Ceiling mounting using stainless steel mounting brackets (included with the light), which can be snapped onto the light (variable mounting distance possible). Pendant mounting (chain, rope (accessory, to be ordered separately)) using stainless steel wire mounting brackets, which can be snapped onto the mounting brackets (included with the light). Horizontal wall mounting possible without any additional accessories.
| Property | Value |
| Max. System power: | 40 W |
| Rated luminous flux according to IEC 62722-2-1: | 4800 lm |
| Length: | 1320 mm |
| Width: | 66 mm |
| Height/depth: | 77 mm |
| Protection rating (IP): | IP65 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | yes |
| Nominal voltage: | 220 to 240 V |
| Housing color: | gray |
| Housing material: | plastic |
| Color temperature: | 4000 K |
| Impact resistance: | IK09 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for wall mounting: | yes |
| Voltage type: | AC |
| With motion detector: | no |
| With light source: | yes |
| Light source: | LED not replaceable |
| With operating device: | yes |
| Cover material: | Opal plastic |
| Without dimming function: | yes |
| Light emission: | direct |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | LED operating device, current-controlled |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for strip light configuration: | no |
| Suitable for pendant suspension: | yes |
| Suitable for surface mounting: | no |
| DMX dimming: | no |
| DSI dimming: | no |
| With air slots: | no |
| LineSwitch dimming: | no |
| Dimming potentiometer (integrated in the device): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming Trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on the operating device: | yes |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Luminaire luminous efficacy: | 120 lm/W |
