Non-metric LED device carrier for the rapid renovation of RIDI LINIA strip lighting systems with continuous power supply. White profiled from galvanized sheet steel, surface coated with polyester resin, with prismatic continuous optics without joints. Luminaire length specially designed for the 1:1 replacement of existing 58 or 35/49/80 watt fluorescent lamp device carriers without changing luminaire and blind distances. By using an adjustable resistor, the luminous flux of the luminaire can be adjusted in several stages. Designed for applications with high technical requirements. 3in1 spring steel clamp with triple function, holding clamp, fall protection clamp, positioning aid for attachment to the mounting rail (VLT-T16 and VLT-T26). The device carrier is suitable for new systems and for renovations of existing systems with continuous power supply in the mounting rail (VLT-T16 and VLT-T26). Direct wide beam light distribution combined with a prismatic optic made of clear UV-resistant PMMA, flush integrated into the device carrier. High-quality appearance without joints for a continuous, homogeneous light image. The device carrier is easy to maintain and clean thanks to its prismatic optics. Tool-free assembly, flexible device carrier can be used anywhere thanks to electrical adapters thanks to continuous current flow in the mounting rail (VLT-T16 and VLT-T26). Protective conductor contact is automatically established by forced earthing. Phase selection is made using a simple sliding contact. Best efficiency thanks to mid-power LEDs as linear modules. Heat decoupling between LED modules and converter. For variably placed device carriers and where the operating device meets the mounting rail connector, a VLTV ...-600 mounting rail connector must be used for assembly. Color rendering index Ra >= 80, color temperature 4000 Kelvin (840) Packaging concept: Resource-optimized concept of the light strip components makes assembly easier
