LED spotlight in a unique design for ceiling installation. Luminaire housing made of sheet steel, spotlight housing made of die-cast aluminum, powder-coated white (similar to RAL9016) or black (similar to RAL9005). Light unit attached to the luminaire housing via a tilting joint, can be swiveled continuously by 80° for flexible use. Device carrier plate made of galvanized sheet steel, carries the operating device, the mains connection terminal with cable strain relief and the connection cable to the LED module. Cover made of thermally resistant polycarbonate clipped on. Light unit equipped with 4 LED COB modules for high luminous flux. The high-quality optics in the form of TIR lenses, specially developed for shelf lighting, ensure efficient light control. Protection type IP20, protection class I. Spotlight with two identical, opposing light units. Installation: Installation in sawn ceiling openings of various ceiling systems with the appropriate fastening set, or lay-in installation in ceiling systems with visible support rails and inserted ceiling panels. No additional fastening accessories are required for lay-in installation.
| Property | Value |
| Max. System power: | 102 W |
| Rated luminous flux according to IEC 62722-2-1: | 10410 lm |
| Housing color: | white |
| Housing material: | steel |
| Protection class (IP): | IP20 |
| Light source: | LED not replaceable |
| Protection class: | I |
| With light source: | yes |
| With operating device: | yes |
| Suitable for recessed mounting: | yes |
| Length: | 299 mm |
| Width: | 299 mm |
| Height/depth: | 77 mm |
| With motion detector: | no |
| Color temperature: | 3000 K |
| Nominal voltage: | 220 to 240 V |
| Suitable for lamp power: | 48 W |
| Color rendering index CRI: | 90-100 |
| Suitable for ceiling mounting: | no |
| Light distribution: | asymmetrical |
| Operating device: | LED operating device current-controlled |
| Luminaire with limited surface temperature 'D-mark': | no |
| Suitable for number of bulbs: | 2 |
| Installation width: | 285 mm |
| Installation length: | 285 mm |
| Voltage type: | AC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | pivotable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for platform/floor mounting: | no |
| Suitable for traverse mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | no |
| Suitable for cable system: | no |
| Surface: | powder-coated |
| Brushed surface: | no |
| Dimming depending on operating device: | yes |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | yes |
| Dimming DMX: | n on|
| Dimming DSI: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Light emission: | direct |
| Luminous efficacy: | 102 lm/W |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Color consistency (McAdam ellipse): | SDCM3 |
