Single light for ceiling or wall mounting. Protection class IP50. Light housing made of torsion-resistant profiled sheet steel, white resin-coated, color similar to RAL9016. LED modules designed as linear surface boards. Mid-power LEDs for even illumination and maximum efficiency. Attached plastic end pieces made of UV-stabilized white PC. 2-component, seamless, all-round foamed seal between the cover and light housing, depending on the protection class. Sealing disc to seal the fastening opening between the fastening surface and light housing. Fastening lugs 9mm high for guiding power cables between the light and the fastening surface. Cover fastening without tools using metal twist locks with plastic seal in the light housing. Silicone-free design. Plastic cover blown from opal, UV-resistant PMMA. Installation: Direct ceiling or wall mounting without additional accessories. Band mounting with fixed luminaire spacing with LFN-LVDM accessory. Can be mounted on support rails using appropriate luminaire fasteners.
Property | Value |
Max. System power: | 26 W |
Rated luminous flux according to IEC 62722-2-1: | 3080 lm |
Suitable for number of lamps: | 1 |
Length: | 605 mm |
Width: | 90 mm |
Height/depth: | 70 mm |
Protection rating (IP): | IP50 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | yes |
Nominal voltage: | 220 to 240 V |
Housing color: | white |
Housing material: | steel |
Color temperature: | 4000 K |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Suitable for wall mounting: | yes |
Voltage type: | AC/DC |
With motion detector: | no |
With light source: | yes |
Light source: | LED not replaceable |
With operating device: | yes |
Cover material: | Opal plastic |
Without dimming function: | yes |
Light emission: | direct |
Light distribution: | symmetrical |
With light sensor: | no |
Operating device: | LED operating device, current-controlled |
Suitable for recessed mounting: | no |
Light color: | white |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Suitable for light strip configuration: | no |
Suitable for pendant suspension: | no |
Suitable for surface mounting: | no |
Suitable for emergency lighting: | yes |
DMX dimming: | no |
DSI dimming: | no |
With air slots: | no |
LineSwitch dimming: | no |
Potentiometer dimming (device integrated): | no |
Dimming 0-10 V: | no |
Dimming GPRS: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | no |
Dimming mains voltage modulation: | no |
Dimming phase control: | no |
Dimming phase control: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming dependent from the operating device: | yes |
Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
Luminaire luminous efficacy: | 118 lm/W |