Light for indoor and outdoor use. Diffuser PMMA: stable, scratch-resistant (replacement for glass). UV-resistant (lightfast, no yellowing). Completely weatherproof. Diffuser PC: hard, rigid, shatterproof, extremely impact-resistant. UV-stabilized. Optionally with integrated HF motion detector. LED service life 50,000 hours (L70, B10). Color tolerance: 3-fold MacAdam (3 SDCM). Master light (MA). Holder made of white plastic. Cover attached using a spring system. Cover made of opal plastic (polycarbonate). With HF motion detector. IP43 ceiling mounting, IP44 wall mounting., HF detector 24 GHz with integrated corridor function, detection range 130°, easy setting of the functions via 3 assigned push switches, sensitivity / range max. 5 m radial, adjustable from 10% to 100%, time control 3 seconds to 15 minutes adjustable in 8 levels, daylight detection via 5 brightness levels and learn-in mode adjustable, up to 9 associated slave lights can be operated on one master light (max. up to 150 W / 230 W), only suitable to a limited extent for outdoor use due to sensitive reaction to all movements, energy efficiency class A+, A+A+
Property | Value |
Max. System power: | 12 W |
Rated luminous flux according to IEC 62722-2-1: | 1350 lm |
Suitable for number of lamps: | 1 |
Height/depth: | 115 mm |
Protection rating (IP): | IP43 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | no |
Nominal voltage: | 220 to 240 V |
Housing color: | white |
Housing material: | plastic |
Color temperature: | 4000 K |
Impact resistance: | IK10 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Rated service life L80/B10 at 25 °C: | 50000 h |
Suitable for wall mounting: | yes |
Outer diameter: | 305 mm |
Voltage type: | AC |
With motion detector: | yes |
Beam angle: | extremely wide beam >80° |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | 25 °C |
Socket: | other |
Connection type: | plug-in terminal |
With operating device: | no |
Cover material: | opal plastic |
Light distributor: | without |
Without dimming function: | yes |
Light emission: | direct/indirect |
Light distribution: | symmetrical |
With light sensor: | no |
Operating device: | not required |
Suitable for recessed mounting: | no |
Light color: | white |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Suitable for light strip configuration: | no |
Suitable for Pendant suspension: | no |
Suitable for surface mounting: | yes |
Suitable for emergency lighting: | no |
Design of the grid: | without |
Covering of the lamp with thermal insulation material possible: | yes |
DMX dimming: | no |
DSI dimming: | no |
With air slots: | no |
Dimming LineSwitch: | no |
Dimming potentiometer (device integrated): | no |
Dimming 0-10 V: | no |
Dimming GPRS: | >no|
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming depending on operating device: | no |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
Suitable for lamp power: | 12 W |
Luminaire luminous efficacy: | 113 lm/W |
Type of wiring: | suitable for through wiring |
Number of poles: | 3 |
Conductor cross-section: | 2.50 mm² |