Improved efficiency, up to 130 lm/W. Integrated control gear. Optimized design. Replaceable and removable LED unit. LED service life 50,000 h (L80, B10). Diffuser made of non-yellowing plastic (PMMA), opal or Alea Optik System. Narrow beam design. Alea Optik System is ideal for office areas (UGR 19) and computer workstations (BAP) in accordance with DIN EN 12464-1. Color tolerance: 3-fold MacAdam (3 SDCM). Housing: powder-coated extruded aluminum profile. End caps: powder-coated aluminum. Alea Optik System: reflector structure (ABS, aluminum vapor-deposited, high-gloss) with diffuser made of non-yellowing plastic (PMMA), opal for glare-free light in the workplace (UGR < 19, suitable for computer screens in accordance with DIN EN 12464-1). Replaceable and removable LED unit with integrated control gear. Energy efficiency class A+
Property | Value |
Max. System power: | 28 W |
Rated luminous flux according to IEC 62722-2-1: | 3550 lm |
Suitable for number of lamps: | 4 |
Length: | 1127 mm |
Width: | 57 mm |
Height/depth: | 75 mm |
Protection rating (IP): | IP20 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | no |
Nominal voltage: | 220 to 240 V |
Housing color: | Aluminium |
Housing material: | Aluminium |
Color temperature: | 4000 K |
Impact resistance: | IK03 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Rated service life L80/B10 at 25 °C: | 50000 h |
Suitable for wall mounting: | no |
Voltage type: | AC |
With motion detector: | no |
Beam angle: | free beam/diffuse |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | -20 to 30 °C |
Socket: | other |
Connection type: | plug-in terminal |
With operating device: | yes |
Material of Cover: | other |
Light distributor: | reflector |
Without dimming function: | yes |
Light emission: | direct |
Light distribution: | symmetrical |
With light sensor: | no |
Operating device: | LED operating device, current-controlled |
Suitable for recessed mounting: | no |
Light color: | white |
Suitable for computer workstations in accordance with EN 12464-1: | yes |
Suitable for Light strip configuration: | no |
Suitable for pendant suspension: | no |
Suitable for surface mounting: | yes |
Suitable for emergency lighting: | no |
Design of the grid: | without |
Covering of the luminaire with thermal insulation material possible: | yes |
DMX dimming: | no |
DSI dimming: | no |
With air slots: | no |
LineSwitch dimming: | no |
Dimming potentiometer (integrated in the device): | no |
Dimming 0-10 V: | no |
Dimming GPRS: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming dependent on operating device: | no |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
Suitable for lamp power: | 28 W |
Luminaire luminous efficacy: | 127 lm/W |
Power factor: | 0.98 |
Wiring type: | Termination |
Number of poles: | 3 |
Conductor cross-section: | 1.50 mm² |