Improved efficiency, up to 130 lm/W. Integrated control gear. Optimized design. Replaceable and removable LED unit. LED service life 50,000 h (L80, B10). Diffuser made of non-yellowing plastic (PMMA), opal or Alea Optik System. Low-beam design. Alea Optik System is ideal for office areas (UGR 19) and computer workstations (BAP) in accordance with DIN EN 12464-1. Color tolerance: triple MacAdam (3 SDCM). Housing: powder-coated extruded aluminum profile. End caps: powder-coated aluminum. Alea Optik System: reflector structure (ABS, aluminum vapor-deposited, high-gloss) with diffuser made of non-yellowing plastic (PMMA), opal for glare-free light in the workplace (UGR < 19, suitable for computer workstations in accordance with DIN EN 12464-1). Replaceable and removable LED unit with integrated operating device. Energy efficiency class A+
| Property | Value |
| Max. System power: | 28 W |
| Rated luminous flux according to IEC 62722-2-1: | 3350 lm |
| Suitable for number of lamps: | 4 |
| Length: | 1141 mm |
| Width: | 71 mm |
| Height/depth: | 1.50 mm |
| Protection rating (IP): | IP20 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 220 to 240 V |
| Housing color: | Aluminium |
| Housing material: | Aluminium |
| Color temperature: | 3000 K |
| Impact resistance: | IK03 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for wall mounting: | yes |
| Voltage type: | AC |
| With motion detector: | no |
| Beam angle: | free beam/diffuse |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | -25 to 30 °C |
| Socket: | other |
| Connection type: | plug-in terminal |
| With operating device: | yes |
| Cover material: | other |
| Light distributor: | reflector |
| Installation height/depth: | 100 mm |
| Without dimming function: | no |
| Installation width: | 60 mm |
| Light emission: | direct |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | LED operating device, current-controlled |
| Suitable for recessed installation: | yes |
| Light color: | white |
| Suitable for computer workstations according to EN 12464-1: | yes |
| Suitable for strip lighting configuration: | no |
| Suitable for pendant suspension: | no |
| Suitable for surface mounting: | no |
| Suitable for emergency lighting: | no |
| Installation length: | 1128 mm |
| Design of the grid: | without |
| Cover of the luminaire with Thermal insulation material possible: | yes |
| DMX dimming: | no |
| DSI dimming: | no |
| With air slots: | no |
| LineSwitch dimming: | no |
| Potentiometer dimming (integrated in the device): | no |
| 0-10 V dimming: | no |
| GPRS dimming: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | yes |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on operating device: | yes |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Suitable for lamp power: | 28 W |
| Luminaire luminous efficacy: | 120 lm/W |
| Power factor: | 0.90 |
| Type of wiring: | Termination |
| Number of poles: | 5 |
| Conductor cross-section: | 1.50 mm² |








