Description
Features
Reviews
Highly efficient LED ceiling insert light for high hygienic requirements. Particularly suitable for use in the healthcare and industrial sectors. Housing made of powder-coated sheet steel. Frameless appearance in the module ceiling thanks to the extra narrow luminaire frame. Luminaire frame made of powder-coated aluminum. Diffuser with a smooth surface on the room side for low sensitivity to dirt and easy cleaning. Diffuser made of durable polycarbonate (PC), opal. LED backlight technology for homogeneous illumination of the entire light-emitting surface. External control gear. Easy installation thanks to an extended 2 m connection cable. Suitable for through-wiring as standard. MultiLumen: The luminaire luminous flux can be adjusted in 4 levels. Factory-set to the lowest luminaire luminous flux. Protection class IP 65 for luminaire and control gear on the room and ceiling side. Approved for use in the food and beverage industry.
| Property | Value |
| Max. System power: | 40 W |
| Rated luminous flux according to IEC 62722-2-1: | 4500 lm |
| Suitable for number of lamps: | 1 |
| Length: | 622 mm |
| Width: | 622 mm |
| Protection rating (IP): | IP65 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 220 to 240 V |
| Housing color: | white |
| Housing material: | aluminum |
| Color temperature: | 4000 K |
| Impact resistance: | IK06 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Rated service life L80/B10 at 25 °C: | 60000 h |
| Suitable for wall mounting: | no |
| Voltage type: | AC |
| With motion detector: | no |
| Beam angle: | free beam/diffuse |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 40 °C |
| Socket: | other |
| Connection type: | Plug-in terminal |
| With operating device: | yes |
| Cover material: | Opal plastic |
| Light distributor: | without |
| Installation height/depth: | 160 mm |
| Without dimming function: | yes |
| Light emission: | direct |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | LED operating device, current-controlled |
| Suitable for recessed mounting: | yes |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for light strip configuration: | no |
| Suitable for pendant suspension: | no |
| Suitable for surface mounting: | no |
| Suitable for emergency lighting: | no |
| Design of the grid: | without |
| Covering of the luminaire with thermal insulation material possible: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| With Air slots: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on the operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Suitable for lamp power: | 31 to 40 W |
| Luminaire luminous efficacy: | 146 lm/W |
| Power factor: | 0.98 |
| Type of wiring: | suitable for through wiring |
| Number of poles: | 3 |
| Conductor cross-section: | 1.50 mm² |
Features
HAB
LED 31-40W 4000K 622x622
Manufacturer
HAN
312573.002.790
GTIN
4051859681342
Covering the luminaire with thermal insulation material possible
No
Connection type
Plug-in terminal
Type of wiring
Suitable for through wiring
Execution of the grid
Without
Beam angle
Free-radiating/diffuse
Rated lifetime L80/B10 at 25 °C
60000 hours
Rated luminous flux according to IEC 62722-2-1
4500lm
Rated ambient temperature according to IEC62722-2-1
-20 to 40 °C
Operating device
LED control gear current controlled
Suitable for computer workstations according to EN 12464-1
No
Width
622 mm
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
No
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
No
Installation height/depth
160 mm
Color temperature
4000K
Color rendering index CRI
80-89
Version
Other
Suitable for surface mounting
No
Suitable for ceiling mounting
Yes
Suitable for flush mounting
Yes
Suitable for lamp power
31 to 40 W
Suitable for number of lamps
1
Suitable for light strip configuration
No
Suitable for emergency lighting
No
Suitable for pendulum suspension
No
Suitable for wall mounting
No
Housing color
White
Glow wire test according to IEC 60695-2-11
650 °C - 30 s
Power factor
0.98
Conductor cross-section
1.50 mm²
Luminaire with limited surface temperature D-mark
No
Luminaire luminous efficacy
146lm/W
Lamps
LED not replaceable
Light emission
Direct
Light color
White
Light distributor
Without
Light distribution
Symmetrical
Length
622 mm
Max. system performance
40W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
With air slots
No
Nominal voltage
220 to 240 V
Without dimming function
Yes
Number of poles
3
Impact resistance
IK06
IP protection)
IP65
Protection class (NEMA)
Other
Protection class
I
Voltage type
AC
Cover material
Plastic opal
Housing material
Aluminum
No reviews yet — your comment may be first.
All reviews 0
