Elegant and highly efficient diffuser light for use even with increased requirements. Housing and end caps made of powder-coated sheet steel. End caps without visible screws, with permanently dimensionally stable silicone foam seal. Curved diffuser made of non-yellowing plastic (PMMA), opal. Specially coordinated 2-component optical system for homogeneous and soft illumination of the entire light-emitting surface. Suitable for ceiling mounting, wall mounting. Control gear integrated. Suitable for through-wiring. MultiLumen: Adjustment of the luminaire luminous flux in 4 levels. With sensors or as a safety light on request. Luminaires with limited surface temperature according to DIN EN 60598-2-24 for use in an environment in which a deposit of non-conductive dust on the luminaire can be expected. Approved for use in the food and beverage industry. Environmentally friendly and resource-saving thanks to replaceable components. No disposable light.
Property | Value |
Max. System power: | 17 W |
Suitable for number of bulbs: | 2 |
Length: | 600 mm |
Width: | 160 mm |
Height/depth: | 58 mm |
Protection type (IP): | IP54 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | yes |
Nominal voltage: | 220 to 240 V |
Housing color: | white |
Housing material: | steel |
Color temperature: | 4000 K |
Impact resistance: | IK05 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Rated service life L80/B10 at 25 °C: | 50000 h |
Suitable for wall mounting: | yes |
Voltage type: | AC |
With motion detector: | no |
Beam angle: | free beam/diffuse |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | -25 to 35 °C |
Socket: | other |
Connection type: | Plug-in terminal |
With operating device: | yes |
Cover material: | opal plastic |
Light distributor: | without |
Without dimming function: | yes |
Light emission: | direct |
Light distribution: | symmetrical |
With light sensor: | no |
Operating device: | LED operating device, current-controlled |
Suitable for recessed mounting: | no |
Light color: | white |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Suitable for light strip configuration: | no |
Suitable for pendulum suspension: | no |
Suitable for surface mounting: | yes |
Suitable for emergency lighting: | yes |
Design of the grid: | without |
Covering of the luminaire with thermal insulation material possible: | yes |
Dimming DMX: | no |
Dimming DSI: | no |
With air slots: | no |
Dimming LineSwitch: | no |
Dimming potentiometer (integrated in device): | no |
Dimming 0-10 V: | no |
Dimming GPRS: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming depending on operating device: | no |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
Suitable for lamp power: | 10 to 17 W |
Power factor: | 0.96 |
Type of wiring: | suitable for through wiring |
Number of poles: | 3 |
Conductor cross section: | 2.50 mm² |