Ammonia resistance and cleaning distance: resistant to stable air containing ammonia. Cleaning distance greater than 10 cm. Rear light component for ceiling illumination. Color rendering Ra 80. Impact protection: IK08. LED service life 50,000 h (L80, B10). Luminaires with limited surface temperature in accordance with DIN EN 60598-2-24 for use in an environment in which deposits of conductive dust on the luminaire can be expected. Operating range: -30°C to +50°C. High protection class IP 66. Color tolerance: 3-fold MacAdam (3 SDCM). The injection-molded diffusers are internally prismatic, UV-resistant and offer homogeneous light output. Flexible installation thanks to movable mounting brackets. Ideal for replacing luminaires. Standard through-wiring for additional luminaires (protection class I and II). Cable installation on both sides using a twist lock. Convenient cable entry via cable gland at both ends. Suitable for use in the food and drinks industry. Planox Eco Farm, suitable for operations with increased levels of dust and ammonia. Side panels made of gray plastic (PMMA). Diffuser made of opal plastic (PMMA). Operating device encapsulated, integrated and firmly connected to the diffuser and side panel. Convenient cable entry via cable gland and easy installation using twist locks on both sides. Ceiling mounting bracket made of stainless steel and triangle bracket for pendant mounting included in delivery. Luminaire with integrated 4-pin through-wiring for connecting additional luminaires together, also as a master-slave circuit. Wattage can be selected in 2 stages (replacement for 1 and 2-lamp luminaires) with internal switch. Energy efficiency class A++
| Feature | Value |
| Max. System power: | 37 W |
| Rated luminous flux according to IEC 62722-2-1: | 4950 lm |
| Suitable for number of lamps: | 1 |
| Length: | 1369 mm |
| Width: | 61 mm |
| Height/depth: | 50 mm |
| Protection rating (IP): | IP66 |
| Protection class: | II |
| Luminaire with limited surface temperature 'D-mark': | yes |
| Nominal voltage: | 220 to 240 V |
| Housing color: | gray |
| Housing material: | plastic |
| Color temperature: | 4000 K |
| Impact resistance: | IK07 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for wall mounting: | yes |
| Voltage type: | AC |
| With motion detector: | no |
| Beam angle: | free beam/diffuse |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | -30 to 50 °C |
| Socket: | other |
| Connection type: | Plug-in terminal |
| With operating device: | yes |
| Cover material: | Opal plastic |
| Light distributor: | without |
| Without dimming function: | yes |
| Light emission: | direct/indirect |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | LED operating device, current-controlled |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for light strip configuration: | no |
| Suitable for pendant suspension: | yes |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | yes |
| Design of the grid: | without |
| Covering of the luminaire with thermal insulation material possible: | yes |
| DMX dimming: | no |
| DSI dimming: | no |
| With Air slots: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on the operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Suitable for lamp power: | 22 to 37 W |
| Luminaire luminous efficacy: | 134 lm/W |
| Power factor: | 0.91 |
| Type of wiring: | suitable for through wiring |
| Number of poles: | 4 |
| Conductor cross-section: | 2.50 mm² |
