Damp-proof luminaire with slim and flat housing shape. Side parts made of plastic (polycarbonate) gray, impact-resistant. Diffuser made of plastic (polycarbonate) opal, impact-resistant. Diffuser extruded, internally prismatic and UV-resistant. Symmetrical light distribution. Homogeneous illumination. Rear light component for ceiling illumination. Flexible installation thanks to movable mounting brackets. Ideal for replacing luminaires. Ceiling mounting bracket made of stainless steel and triangle bracket for pendant mounting included in delivery. Control gear encapsulated, integrated and firmly connected to the diffuser and side part. Luminaire with integrated 4-pin through-wiring for connecting additional luminaires in a row. Convenient cable entry via cable glands. Easy installation thanks to twist locks on both sides. MultiLumen: The luminous flux of the luminaire can be adjusted in 2 levels. Factory-set to H (high - high luminous flux). Luminaires with limited surface temperature according to DIN EN 60598-2-24 for use in an environment in which a deposition of conductive dust on the luminaire can be expected. Approved for use in the food and beverage industry.
| Property | Value |
| Max. System power: | 37 W |
| Rated luminous flux according to IEC 62722-2-1: | 3050 lm |
| Suitable for number of lamps: | 1 |
| Length: | 1369 mm |
| Width: | 61 mm |
| Height/Depth: | 50 mm |
| Protection class (IP): | IP66 |
| Protection class: | II |
| Luminaire with limited surface temperature 'D-mark': | yes |
| Rated voltage: | 220 to 240 V |
| Housing color: | gray |
| Housing material: | plastic |
| Color temperature: | 4000 K |
| Impact resistance: | IK08 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for wall mounting: | yes |
| Voltage type: | AC |
| With motion detector: | no |
| Beam angle: | free-radiating/diffuse |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | -30 to 45 °C |
| Socket: | other |
| Connection type: | plug-in terminal |
| With operating device: | yes |
| Cover material: | opal plastic |
| Light distributor: | other |
| Without dimming function: | yes |
| Light emission: | direct/indirect |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | LED operating device, current-controlled |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for strip light configuration: | no |
| Suitable for pendant suspension: | yes |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | yes |
| Design of the grid: | without |
| Covering of the lamp with thermal insulation material possible: | yes |
| DMX dimming: | no |
| DSI dimming: | no |
| With air vents: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge phase control: | no |
| Dimming leading edge phase control: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
| Suitable for lamp power: | 22 to 37 W |
| Luminaire luminous efficacy: | 139 lm/W |
| Power factor: | 0.91 |
| Wiring type: | suitable for through wiring |
| Number of poles: | 4 |
| Conductor cross section: | 2.50 mm² |
