Design-oriented damp-proof luminaire. 1:1 replacement for fluorescent lamps. Impact protection: IK08. High protection class IP 66. Operating range -30°C to +45°C. Operating range (with motion detector): -20°C to +45°C. Luminaires with limited surface temperature in accordance with DIN EN 60598-2-24 for use in an environment in which deposits of conductive dust on the luminaire can be expected. MultiLumen function: light output can be adjusted in 2 levels (2-in-1 principle = replacement for 1 and 2-lamp luminaires). Color rendering Ra 80. Color tolerance: 3x MacAdam (3 SDCM). LED service life 50,000 h (L80, B10). Housing and end caps made of impact-resistant polycarbonate (PC). The injection-molded diffusers are internally prismatic, UV-resistant and offer a homogeneous light output. Rear light component for ceiling illumination. Flexible installation thanks to movable mounting brackets. Ideal for replacing lights. Cable installation on both sides thanks to twist lock. Convenient cable entry via cable screw connection at both ends. Standard through-wiring for additional lights. Suitable for use in the food and beverage industry. Versions with infrared motion detector: Adjustable run-on time from 10 s to 20 min and ambient brightness from 1 to 50 lux. Side parts made of gray plastic (polyamide). Diffuser made of opal plastic (polycarbonate). Control gear encapsulated and firmly connected to the diffuser and side part. Includes built-in motion detector in stand-alone operation. Convenient cable entry via cable screw connection and easy installation thanks to twist lock on both sides. Ceiling mounting bracket made of stainless steel and 3 triangle brackets for pendant mounting included in delivery. Light source (LED) included in delivery. With internal switching element adjustable to L and H for: Luminaire luminous flux on L: 3600 lm (24.5W) Luminaire luminous flux on H: 6500 lm (53W) The switching element is set to position H at the factory. Ener
Property | Value |
Max. System power: | 54 W |
Rated luminous flux according to IEC 62722-2-1: | 4700 lm |
Suitable for number of lamps: | 1 |
Length: | 1700 mm |
Width: | 66 mm |
Height/depth: | 71 mm |
Protection rating (IP): | IP66 |
Protection class: | II |
Luminaire with limited surface temperature 'D-mark': | yes |
Nominal voltage: | 220 to 240 V |
Housing color: | gray |
Housing material: | plastic |
Color temperature: | 4000 K |
Impact resistance: | IK08 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Rated service life L80/B10 at 25 °C: | 50000 h |
Suitable for wall mounting: | yes |
Voltage type: | AC |
With motion detector: | yes |
Beam angle: | free beam/diffuse |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | -20 to 45 °C |
Socket: | other |
Connection type: | plug-in terminal |
With operating device: | yes |
Cover material: | opal plastic |
Light distributor: | other |
Without dimming function: | yes |
Light emission: | direct/indirect |
Light distribution: | symmetrical |
With light sensor: | no |
Operating device: | LED operating device, current-controlled |
Suitable for recessed mounting: | no |
Light color: | white |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Suitable for light strip configuration: | no |
Suitable for pendant suspension: | yes |
Suitable for surface mounting: | yes |
Suitable for emergency lighting: | yes |
Design of the grid: | without |
Covering of the luminaire with thermal insulation material possible: | yes |
Dimming DMX: | no |
Dimming DSI: | no |
With Air slots: | no |
Dimming LineSwitch: | no |
Dimming potentiometer (device integrated): | no |
Dimming 0-10 V: | no |
Dimming GPRS: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming depending on the operating device: | no |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | 750 °C - 30 s |
Suitable for lamp power: | 33 to 54 W |
Luminaire luminous efficacy: | 143 lm/W |
Power factor: | 0.94 |
Type of wiring: | suitable for through wiring |
Number of poles: | 4 |
Conductor cross-section: | 2.50 mm² |