Classic damp-proof luminaire with two-part luminaire construction. Housing made of impact-resistant, UV-resistant plastic (polycarbonate). Injected silicone-based seal with increased resistance even under extreme conditions. Diffuser made of impact-resistant opal plastic (polycarbonate) with excellent light transmission of up to 90%. Diffuser attached using stainless steel clips for easy assembly and opening. Symmetrical light distribution. Homogeneous illumination. Flexible and easy installation using sliding quick-fixing clips made of stainless steel and diffuser with integrated device carrier and variable cable entry (front or rear). Suitable for ceiling mounting, chain or rope pendant, wall mounting. Ceiling mounting bracket made of stainless steel and triangle bracket for pendant mounting included in delivery. MultiLumen: Adjustment of the luminaire luminous flux in 2 levels. Factory-set to HO (high output). With through-wiring as standard (2.5mm2). Luminaires with limited surface temperature according to DIN EN 60598-2-24 for use in an environment in which a deposit of conductive dust on the luminaire can be expected. Approved for use in the food and beverage industry. Suitable for lighting public parking structures and public car parks according to EN-67528. Not a disposable luminaire. Environmentally friendly and resource-saving thanks to replaceable components.
| Property | Value |
| Max. System power: | 43 W |
| Suitable for number of bulbs: | 1 |
| Length: | 1174 mm |
| Width: | 102 mm |
| Height/depth: | 85 mm |
| Protection type (IP): | IP66 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | yes |
| Nominal voltage: | 220 to 240 V |
| Housing color: | gray |
| Color temperature: | 4000 K |
| Impact resistance: | IK08 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Rated service life L80/B10 at 25 °C: | 72000 h |
| Suitable for wall mounting: | yes |
| Voltage type: | AC/DC |
| With motion detector: | no |
| Beam angle: | free beam/diffuse |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | -25 to 40 °C |
| Socket: | other |
| Connection type: | plug-in terminal |
| With operating device: | yes |
| Cover material: | opal plastic |
| Light distributor: | without |
| Without dimming function: | yes |
| Light emission: | direct |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | LED operating device, current-controlled |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for light strip configuration: | no |
| Suitable for pendulum suspension: | no |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | yes |
| Design of the grid: | without |
| Covering of the lamp with thermal insulation material possible: | yes |
| DMX dimming: | no |
| DSI dimming: | no |
| With air slots: | no |
| LineSwitch dimming: | no |
| Potentiometer dimming (device integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming phase control: | no |
| Dimming phase control: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming dependent from the operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
| Suitable for lamp power: | 29 to 43 W |
| Type of wiring: | suitable for through-wiring |
| Number of poles: | 5 |
| Conductor cross-section: | 2.50 mm² |
