Description
Features
Reviews
Flat surface-mounted luminaires with LED for lighting close to the wall, for example steps, ramps or corridors. Depth of just 24 mm for direct installation above the cable outlet. Three designs for optimal adaptation to the surroundings. Stable die-cast housing made of corrosion-resistant aluminum for outdoor use, powder-coated, stainless steel screws. Drill hole tolerance compensation for precise installation. Housing made of corrosion-resistant die-cast aluminum for outdoor use, powder-coated. With drill hole tolerance compensation. Built-in operating device. Clear safety glass (ESG) cover. With 3x connection terminal maximum 1.5 mm. Suitable for maximum cable diameter d 13 mm. Energy efficiency class A+
| Property | Value |
| Max. System power: | 10 W |
| Rated luminous flux according to IEC 62722-2-1: | 190 lm |
| Suitable for number of lamps: | 1 |
| Length: | 200 mm |
| Width: | 200 mm |
| Height/depth: | 24 mm |
| Protection rating (IP): | IP65 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 100 to 240 V |
| Housing color: | anthracite |
| Housing material: | aluminum |
| Color temperature: | 3000 K |
| Impact resistance: | IK09 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | no |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for wall mounting: | yes |
| Voltage type: | AC |
| With motion detector: | no |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 40 °C |
| Socket: | other |
| Connection type: | screw terminal |
| With operating device: | yes |
| Cover material: | transparent glass |
| Light distributor: | without |
| Without dimming function: | yes |
| Light emission: | direct |
| Light distribution: | asymmetrical |
| With light sensor: | no |
| Operating device: | LED operating device, current-controlled |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for light strip configuration: | no |
| Suitable for pendulum suspension: | no |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | no |
| Design of the grid: | without |
| Covering of the luminaire with thermal insulation material possible: | yes |
| Dimming DMX: | no |
| Dimming DSI: | no |
| With air slots: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (integrated in device): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 960 °C - 30 s |
| Suitable for lamp power: | 10 W |
| Luminaire luminous efficacy: | 19 lm/W |
| Type of wiring: | Termination |
| Number of poles: | 2 |
| Conductor cross section: | 1.50 mm² |
Features
HAB
14W 3000K 200x200x24
Manufacturer
HAN
581633.0031
GTIN
4051859113782
Covering the luminaire with thermal insulation material possible
Yes
Connection type
Screw terminal
Type of wiring
Diploma
Execution of the grid
Without
Rated lifetime L80/B10 at 25 °C
50000 hours
Rated luminous flux according to IEC 62722-2-1
190lm
Rated ambient temperature according to IEC62722-2-1
-20 to 40 °C
Operating device
LED control gear current controlled
Suitable for computer workstations according to EN 12464-1
No
Width
200 mm
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
No
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
No
Color temperature
3000K
Color rendering index CRI
80-89
Version
Other
Suitable for surface mounting
Yes
Suitable for ceiling mounting
No
Suitable for flush mounting
No
Suitable for lamp power
10W
Suitable for number of lamps
1
Suitable for light strip configuration
No
Suitable for emergency lighting
No
Suitable for pendulum suspension
No
Suitable for wall mounting
Yes
Housing color
Anthracite
Glow wire test according to IEC 60695-2-11
960 °C - 30 s
Height/Depth
24 mm
Conductor cross-section
1.50 mm²
Luminaire with limited surface temperature D-mark
No
Luminaire luminous efficacy
19lm/W
Lamps
LED not replaceable
Light emission
Direct
Light color
White
Light distributor
Without
Light distribution
Asymmetrical
Length
200 mm
Max. system performance
10W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
With air slots
No
Nominal voltage
100 to 240 V
Without dimming function
Yes
Number of poles
2
Impact resistance
IK09
IP protection)
IP65
Protection class (NEMA)
Other
Protection class
I
Voltage type
AC
Cover material
Glass transparent
Housing material
Aluminum
No reviews yet — your comment may be first.
All reviews 0
