Elegant appearance without visible screws thanks to bayonet lock with snap lock (optional) as theft protection. LED: Use of smart, cost-effective LED modules for mains voltage with high system light output for energy-saving operation. Seawater-resistant coating. Replaceable LED module. Second cable entry for mains forwarding. Housing made of corrosion-resistant die-cast aluminum, powder-coated, robust design. Diaphragm valve for pressure equalization and prevention of condensation. Fastening points outside the lamp compartment, safe installation through consistent error avoidance. Fast installation: tolerance compensation for drill holes. Generous cable management space allows wall outlet even in the middle of the luminaire. Electrical connection via plug-in terminals. Diffuser attachment using mounting fixation. Huge variety of variants: 24 possible designs per configuration, based on two variants: crystal glass, satin matt or impact-resistant, opal plastic (PC). Three standard colors. Four housing variants: flat cover or spherical cap, half shell, protective basket. Versions for escape route lighting with central battery feed available. Housing made of corrosion-resistant die-cast aluminum for outdoor use, powder-coated. Diffuser ball cap made of plastic (polycarbonate), opal. With mounting fixation. Screw-free installation of the diffuser via bayonet lock with snap lock. Fastening outside the sealed area with hole tolerance compensation. Mains connection 2x 3x 1.5 mm. Energy efficiency class A++, E
| Property | Value |
| Max. System power: | 57 W |
| Suitable for number of lamps: | 1 |
| Height/depth: | 91 mm |
| Protection rating (IP): | IP66 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 0 to 250 V |
| Housing color: | anthracite |
| Material of the housing: | Aluminium |
| Impact resistance: | IK10 |
| Suitable for ceiling mounting: | yes |
| Suitable for wall mounting: | yes |
| Outer diameter: | 268 mm |
| Type of voltage: | AC/DC |
| With motion detector: | no |
| Beam angle: | extremely wide beam >80° |
| Light source: | HV halogen lamp |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 45 °C |
| Socket: | E27 |
| Connection type: | Plug-in terminal |
| With operating device: | no |
| Cover material: | Opal plastic |
| Light distributor: | without |
| Without dimming function: | yes |
| Light emission: | direct |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | not required |
| Suitable for recessed mounting: | no |
| Suitable for computer workstations in accordance with EN 12464-1: | yes |
| Suitable for light strip configuration: | no |
| Suitable for pendant suspension: | no |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | yes |
| Design of the grid: | without |
| Covering of the luminaire with thermal insulation material possible: | yes |
| DMX dimming: | no |
| DSI dimming: | no |
| With air slots: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | yes |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on the operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
| Suitable for lamp power: | 57 W |
| Power factor: | 1 |
| Type of Wiring: | suitable for through wiring |
| Number of poles: | 3 |
| Conductor cross-section: | 1.50 mm² |
