Elegant appearance without visible screws thanks to bayonet lock with snap lock (optional) as theft protection. LED: Use of smart, cost-effective LED modules for mains voltage with high system light output for energy-saving operation. Seawater-resistant coating. Replaceable LED module. Second cable entry for mains forwarding. Housing made of corrosion-resistant die-cast aluminum, powder-coated, robust design. Diaphragm valve for pressure equalization and prevention of condensation. Fastening points outside the lamp compartment, safe installation through consistent error avoidance. Fast installation: tolerance compensation for drill holes. Generous cable management space allows wall outlet even in the middle of the luminaire. Electrical connection via plug-in terminals. Diffuser attachment using mounting fixation. Huge variety of variants: 24 possible designs per configuration, based on two variants: crystal glass, satin matt or impact-resistant, opal plastic (PC). Three standard colors. Four housing variants: flat cover or spherical cap, half shell, protective basket. Versions for escape route lighting with central battery feed available. Housing made of corrosion-resistant die-cast aluminum for outdoor use, powder-coated. Protective grille with diffuser ball cap made of opal glass, satin matt. With mounting fixation. Screwless installation of the diffuser via bayonet lock with snap lock. Fastening outside the sealed area with hole tolerance compensation. Mains connection 2x 3x 1.5 mm. Energy efficiency class A++, E
| Property | Value |
| Max. System power: | 57 W |
| Suitable for number of lamps: | 1 |
| Height/depth: | 100 mm |
| Protection rating (IP): | IP66 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 0 to 250 V |
| Housing color: | anthracite |
| Material of the housing: | Aluminium |
| Impact resistance: | IK08 |
| Suitable for ceiling mounting: | yes |
| Suitable for wall mounting: | yes |
| Outer diameter: | 268 mm |
| Type of voltage: | AC/DC |
| With motion detector: | no |
| Beam angle: | extremely wide beam >80° |
| Light source: | HV halogen lamp |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 45 °C |
| Socket: | E27 |
| Connection type: | Plug-in terminal |
| With operating device: | no |
| Cover material: | Opal glass |
| Light distributor: | without |
| Without dimming function: | yes |
| Light emission: | direct |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | not required |
| Suitable for recessed mounting: | no |
| Suitable for computer workstations in accordance with EN 12464-1: | yes |
| Suitable for light strip configuration: | no |
| Suitable for pendant suspension: | no |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | yes |
| Design of the grid: | without |
| Covering of the luminaire with thermal insulation material possible: | yes |
| DMX dimming: | no |
| DSI dimming: | no |
| With air slots: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | yes |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on the operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 960 °C - 30 s |
| Suitable for lamp power: | 57 W |
| Power factor: | 1 |
| Type of Wiring: | suitable for through wiring |
| Number of poles: | 3 |
| Conductor cross-section: | 1.50 mm² |
