Made in Germany. Four light heads, one mounting base. Seawater-resistant coating. Quick installation: Wall mounting and electrical connection are only made on the wall plate, the light head is then attached without screws and held in place using the RZB Gravolock system. Elegant appearance without visible screws thanks to the RZB Gravolock system with snap lock as theft protection. The innovative housing concept protects the light source and operating devices safely from all weather influences. The large cable inlet as standard allows easy mains forwarding without an additional junction box. The clear design language supports applications in modern architecture. Diaphragm valve for pressure equalization and prevention of condensation. Housing made of corrosion-resistant die-cast aluminum for outdoor use, powder-coated. Cover made of clear safety glass (ESG) with side-glow effect, ceramic coated. Cover attached using a bayonet lock. Wall mounting outside the sealed area with hole tolerance compensation. Screwless light attachment using Gravolock. Light source (mains voltage LED module) included in delivery. Supplied as standard with a diaphragm valve to prevent condensation. Electrical connection with plug-in terminals on the wall base with quick connector. With a second cable entry for mains transmission. Energy efficiency class A+
| Feature | Value |
| Max. System power: | 7.50 W |
| Rated luminous flux according to IEC 62722-2-1: | 190 lm |
| Suitable for number of lamps: | 1 |
| Length: | 100 mm |
| Width: | 154 mm |
| Height/depth: | 307 mm |
| Protection rating (IP): | IP65 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 220 to 240 V |
| Housing color: | anthracite |
| Housing material: | aluminum |
| Color temperature: | 4000 K |
| Impact resistance: | IK03 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | no |
| Suitable for wall mounting: | yes |
| Voltage type: | AC |
| With motion detector: | no |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 35 °C |
| Socket: | other |
| Connection type: | plug-in terminal |
| With operating device: | no |
| Cover material: | transparent glass |
| Light distributor: | without |
| Without dimming function: | yes |
| Light emission: | direct/indirect |
| Light distribution: | asymmetrical |
| With Light sensor: | no |
| Operating device: | not required |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for light strip configuration: | no |
| Suitable for pendulum suspension: | no |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | no |
| Design of the grid: | without |
| Covering of the lamp with thermal insulation material possible: | yes |
| DMX dimming: | no |
| DSI dimming: | no |
| With air slots: | no |
| LineSwitch dimming: | no |
| Potentiometer dimming (device integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming phase control: | no |
| Dimming phase control: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming dependent from the operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 960 °C - 30 s |
| Suitable for lamp power: | 7.50 W |
| Luminaire luminous efficacy: | 26 lm/W |
| Power factor: | 0.60 |
| Type of wiring: | suitable for through wiring |
| Number of poles: | 3 |
| Conductor cross section: | 2.50 mm² |
