Robust protective tube luminaire for high requirements. Equipment carrier made of sheet steel, white powder-coated. End caps made of plastic (polyamide) gray. Diffuser made of plastic (polycarbonate) opal, impact-resistant. Symmetrical light distribution. Homogeneous illumination. Suitable for wall, ceiling and pendant mounting thanks to accessories. Control gear integrated. Easy installation thanks to the Wieland RST® CLASSIC plug & play connector system. Luminaire with integrated through-wiring for connecting additional luminaires in series using two Wieland RST® Classic connectors (plug and socket). Accessories for the electrical connection must be ordered separately. Mounting accessories must always be ordered with the luminaire. Luminaires with limited surface temperature according to DIN EN 60598-2-24 for use in an environment in which deposits of conductive dust on the luminaire can be expected. Approved for use in the food and beverage industry. Suitable for lighting public parking structures and public car parks according to EN-67528. Not a disposable luminaire. Environmentally friendly and resource-saving thanks to replaceable components.
Property | Value |
Max. System power: | 39 W |
Suitable for number of lamps: | 1 |
Length: | 1280 mm |
Protection rating (IP): | IP67 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | yes |
Nominal voltage: | 220 to 240 V |
Housing color: | white |
Housing material: | Plastic |
Color temperature: | 4000 K |
Impact resistance: | IK08 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Rated service life L80/B10 at 25 °C: | 72000 h |
Suitable for wall mounting: | yes |
Outer diameter: | 78 mm |
Voltage type: | AC/DC |
With motion detector: | no |
Beam angle: | free beam/diffuse |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | -20 to 30 °C |
Socket: | other |
With control gear: | yes |
Cover material: | plastic opal |
Light distributor: | without |
Without dimming function: | yes |
Light emission: | direct |
Light distribution: | symmetrical |
With light sensor: | no |
Control gear: | LED control gear current-controlled |
Suitable for recessed mounting: | no |
Light colour: | white |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Suitable for light strip configuration: | no |
Suitable for pendant suspension: | yes |
Suitable for surface mounting: | yes |
Suitable for emergency lighting: | yes |
Version of the grid: | without |
Covering of the lamp with thermal insulation material possible: | yes |
DMX dimming: | no |
DSI dimming: | no |
With air slots: | no |
LineSwitch dimming: | no |
Potentiometer dimming (integrated in the device): | no |
0-10 V dimming: | no |
Dimming GPRS: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming depending on operating device: | no |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | 750 °C - 30 s |
Suitable for lamp power: | 39 W |
Power factor: | 0.98 |
Type of wiring: | with through wiring |
Number of poles: | 3 |
Conductor cross-section: | 2.50 mm² |