Ammonia-resistant protective tube luminaire for high requirements. Equipment carrier made of sheet steel, white powder-coated. End caps made of plastic (polyamide) gray. Diffuser made of UV-stable plastic (PMMA) opal. Symmetrical light distribution. Homogeneous illumination. Suitable for wall, ceiling and pendant mounting thanks to accessories. Integrated operating device. Simple installation thanks to the Wieland RST® CLASSIC plug & play plug-in system. Mounting accessories must always be ordered for the luminaire. Luminaires with limited surface temperature in accordance with DIN EN 60598-2-24 for use in an environment in which a deposit of conductive dust on the luminaire can be expected. Ammonia-resistant: Suitable for use in stables with livestock farming and ancillary agricultural areas. Not a disposable luminaire. Environmentally friendly and resource-saving thanks to replaceable components.
Property | Value |
Max. System power: | 39 W |
Suitable for number of lamps: | 1 |
Length: | 1280 mm |
Protection rating (IP): | IP67 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | yes |
Nominal voltage: | 220 to 240 V |
Housing color: | white |
Housing material: | Plastic |
Color temperature: | 4000 K |
Impact resistance: | IK08 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Rated service life L80/B10 at 25 °C: | 50000 h |
Suitable for wall mounting: | yes |
Outer diameter: | 78 mm |
Voltage type: | AC/DC |
With motion detector: | no |
Beam angle: | free beam/diffuse |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | -20 to 30 °C |
Socket: | other |
With control gear: | yes |
Cover material: | plastic opal |
Light distributor: | without |
Without dimming function: | yes |
Light emission: | direct |
Light distribution: | symmetrical |
With light sensor: | no |
Control gear: | LED control gear, current-controlled |
Suitable for recessed mounting: | no |
Light colour: | white |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Suitable for light strip configuration: | no |
Suitable for pendant suspension: | yes |
Suitable for surface mounting: | yes |
Suitable for emergency lighting: | yes |
Version of the grid: | without |
Covering of the lamp with thermal insulation material possible: | yes |
DMX dimming: | no |
DSI dimming: | no |
With air slots: | no |
LineSwitch dimming: | no |
Potentiometer dimming (integrated in the device): | no |
0-10 V dimming: | no |
Dimming GPRS: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming depending on operating device: | no |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | 750 °C - 30 s |
Suitable for lamp power: | 39 W |
Power factor: | 0.98 |
Type of wiring: | Termination |
Number of poles: | 3 |
Conductor cross-section: | 2.50 mm² |