Wall lights in a classic design language. Opal glass for a glare-free appearance. Resistant plastic cylinders made of UV-stabilized polyethylene also allow use in environments with increased mechanical stress. High-quality materials and workmanship as well as the high protection class ensure many years of problem-free operation. LED: Use of smart, cost-effective LED modules for mains voltage with high system light output for energy-saving operation. Wall arm made of powder-coated die-cast aluminum. Diffuser made of opal glass with a satin finish, hand-blown. Diffuser attached using a bayonet lock. Wall arm with motion detector including twilight switch. Mounting height of the wall light 2.0 m to 2.5 m., maximum switching capacity 1000 W (resistive load), switch-on time adjustable from 6 seconds to 8 minutes, twilight value 5 lux to 2000 lux adjustable, detection angle horizontal 360°, vertical 25°, detection range 9 m, energy efficiency class A++, C
| Property | Value |
| Max. System power: | 77 W |
| Suitable for number of bulbs: | 1 |
| Length: | 230 mm |
| Width: | 130 mm |
| Height/depth: | 410 mm |
| Protection rating (IP): | IP54 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 0 to 250 V |
| Housing color: | Silver |
| Housing material: | Aluminum |
| Impact resistance: | IK02 |
| Suitable for ceiling mounting: | no |
| Suitable for wall mounting: | yes |
| Voltage type: | AC/DC |
| With motion detector: | yes |
| Beam angle: | extremely wide beam >80° |
| Light source: | HV halogen lamp |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 40 °C |
| Socket: | E27 |
| Connection type: | Plug-in terminal |
| With operating device: | no |
| Cover material: | Opal glass |
| Light distributor: | without |
| Without dimming function: | yes |
| Light emission: | direct/indirect |
| Light distribution: | symmetrical |
| With light sensor: | yes |
| Operating device: | not required |
| Suitable for recessed mounting: | no |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for strip light configuration: | no |
| Suitable for pendant suspension: | no |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | yes |
| Design of the grid: | without |
| Covering of the luminaire with thermal insulation material possible: | yes |
| Dimming DMX: | no |
| Dimming DSI: | no |
| With air slots: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | yes |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on the operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Suitable for lamp power: | 77 W |
| Power factor: | 1 |
| Wiring type: | Termination |
| Number of poles: | 3 |
| Conductor cross-section: | 2.50 mm² |
