Made in Germany. 3 different light distributions: narrow spot, medium spot and flood. Fixed installation or mobile with plug and 5m connection cable. Ground spike set as accessory. Emergency lighting option via central battery available. Second cable inlet for looping through. Reduced connected load with the same luminous flux as the switchable version to save energy. DALI version with increased luminous flux. COB LEDs with interchangeable socket, optionally light color 830 or 840. LED service life 50,000 h (L80, B10). Mounting accessories for mast and wall mounting available. Suitable for use in the food and beverage industry. Housing made of corrosion-resistant die-cast aluminum for outdoor use, powder-coated. Bracket made of powder-coated aluminum. Cover made of clear safety glass (ESG), ceramic coated. COB LED with interchangeable socket. Reflector made of purest aluminum, silver-colored, high-gloss anodized. Supplied as standard with a diaphragm valve to prevent condensation. With plug-in connection terminal 3x 2.5 mm. Suitable for a maximum cable diameter of d 13 mm. Second cable duct for mains forwarding available as an accessory. Energy efficiency class A++
Property | Value |
Max. System power: | 23 W |
Rated luminous flux according to IEC 62722-2-1: | 2200 lm |
Housing color: | Silver |
Housing material: | Aluminum |
Protection class (IP): | IP65 |
Socket: | without |
Light source: | LED not replaceable |
Protection class: | I |
With light source: | yes |
With operating device: | yes |
Suitable for recessed mounting: | no |
Length: | 194 mm |
Width: | 109 mm |
Height/depth: | 226 mm |
With motion detector: | no |
Color temperature: | 3000 K |
Nominal voltage: | 220 to 240 V |
Rated service life L80/B10 at 25 °C: | 50000 h |
Suitable for lamp power: | 23 W |
Beam angle: | extremely wide beam >80° |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Light distribution: | symmetrical |
Operating device: | LED operating device, current-controlled |
Impact resistance: | IK07 |
Luminaire with limited surface temperature 'D-mark': | yes |
Reflector: | high-gloss |
Suitable for number of bulbs: | 1 |
Luminous flux: | 2200 lm |
Cover material: | transparent glass |
Cover of the lamp with Thermal insulation material possible: | yes |
Voltage type: | AC |
Light color: | white |
Suitable for track mounting: | no |
Adjustability: | not adjustable |
Suitable for clamp mounting: | no |
Suitable for pendulum suspension: | no |
Suitable for pedestal/floor mounting: | yes |
Suitable for truss mounting: | no |
With light sensor: | no |
Suitable for surface mounting: | no |
Suitable for cable system: | no |
Surface: | powder-coated |
Brushed surface: | no |
LED nominal current at constant current: | 96 to 105 mA |
Dimming depends on Operating device: | no |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming DALI: | no |
Dimming DMX: | no |
Dimming DSI: | no |
Dimming potentiometer (integrated in device): | no |
Dimming GPRS: | no |
Dimming LineSwitch: | no |
Dimming manufacturer-specific: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Without dimming function: | yes |
Light distributor: | Reflector |
Light emission: | direct |
Total harmonic distortion (THD): | 0.10 |
Protection class (NEMA): | other |
Rated ambient temperature according to IEC62722-2-1: | -25 to 50 °C |
Type of wiring: | suitable for through wiring |
Power factor: | 0.95 |
Number of poles: | 3 |
Conductor cross-section: | 2.50 mm² |
Connection type: | Plug-in terminal |
Luminaire luminous efficacy: | 96 lm/W |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Glow wire test in accordance with IEC 60695-2-11: | 960 °C - 30 s |
Photobiological safety in accordance with EN 62471: | RG1 |
Color consistency (McAdam ellipse): | SDCM3 |