Description
Features
Reviews
Multifunctional surface-mounted spotlight for area lighting. Very flat design. Powder-coated sheet steel housing. Can be rotated 356° horizontally and pivoted 90° vertically. Scaling of the pivot angle. Highly efficient LED units with flush opal diffuser made of non-yellowing PMMA. Symmetrical, wide-beam light distribution. Best color rendering thanks to CRI>90 for fresh produce and colored textiles. With multi-adapter for 3-phase 230 V power tracks. Suitable for power tracks on the ceiling. MultiLumen: The luminous flux of the luminaire can be adjusted in 3 levels. Factory-preset to the highest luminous flux. Environmentally friendly and resource-saving thanks to replaceable components.
| Property | Value |
| Max. System power: | 33 W |
| Rated luminous flux according to IEC 62722-2-1: | 1700 lm |
| Housing color: | black |
| Protection class (IP): | IP20 |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | I |
| With light source: | yes |
| With operating device: | yes |
| Suitable for recessed mounting: | no |
| Length: | 569 mm |
| Width: | 57 mm |
| Height/depth: | 77 mm |
| With motion detector: | no |
| Color temperature: | 2700 K |
| Nominal voltage: | 220 to 240 V |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for lamp power: | 18 to 33 W |
| Beam angle: | extremely wide beam >80° |
| Color rendering index CRI: | 90-100 |
| Suitable for ceiling mounting: | no |
| Light distribution: | symmetrical |
| Operating device: | LED operating device, current-controlled |
| Impact resistance: | IK03 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Reflector: | without |
| Suitable for number of bulbs: | 1 |
| Luminous flux: | 1700 lm |
| Covering of the lamp with thermal insulation material possible: | yes |
| Type of voltage: | AC |
| Light color: | white |
| Suitable for track mounting: | yes |
| Adjustability: | rotatable and pivotable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for platform/floor mounting: | no |
| Suitable for truss mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | no |
| Suitable for cable system: | no |
| Surface: | powder-coated |
| Brushed surface: | no |
| LED nominal current at constant current: | 75 to 82 mA |
| Dimming depending on the operating device: | no |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no | >
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Light distributor: | without |
| Light output: | direct |
| Total harmonic distortion (THD): | 0.20 |
| Protection class (NEMA): | other |
| Rated ambient temperature according to IEC62722-2-1: | 5 to 25 °C |
| Wiring type: | Termination |
| Power factor: | 0.90 |
| Luminaire luminous efficacy: | 95 lm/W |
| Suitable for computer workstations according to EN 12464-1: | no |
| Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
| Photobiological safety according to EN 62471: | RG1 |
| Color consistency (McAdam ellipse): | SDCM3 |
Features
Total harmonic distortion (THD)
0.20
HAB
TX Move 33W-927 569x57x77
Manufacturer
HAN
742160.003.2
GTIN
4051859756897
Covering the luminaire with thermal insulation material possible
Yes
Type of wiring
Diploma
Rated lifetime L80/B10 at 25 °C
50000 hours
Rated luminous flux according to IEC 62722-2-1
1700lm
Rated ambient temperature according to IEC62722-2-1
5 to 25 °C
Operating device
LED control gear current controlled
Suitable for computer workstations according to EN 12464-1
No
Width
57 mm
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
No
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
No
Color consistency (McAdam ellipse)
SDCM3
Color temperature
2700K
Color rendering index CRI
90-100
Version
Without
Suitable for surface mounting
No
Suitable for ceiling mounting
No
Suitable for flush mounting
No
Suitable for clamp mounting
No
Suitable for lamp power
18 to 33 W
Suitable for number of lamps
1
Suitable for pendulum suspension
No
Suitable for podium/floor mounting
No
Suitable for rope system
No
Suitable for busbar mounting
Yes
Suitable for truss mounting
No
Housing color
Black
Glow wire test according to IEC 60695-2-11
850 °C - 30 s
Height/Depth
77 mm
LED nominal current at constant current
75 to 82 mA
Power factor
0.90
Luminaire with limited surface temperature D-mark
No
Luminaire luminous efficacy
95lm/W
Lamps
LED not replaceable
Light emission
Direct
Light color
White
Luminous flux
1700lm
Light distributor
Without
Light distribution
Symmetrical
Length
569 mm
Max. system performance
33W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
Nominal voltage
220 to 240 V
Surface
Powder coated
Brushed surface
No
Without dimming function
Yes
Photobiological safety according to EN 62471
RG1
Reflector
Without
Impact resistance
IK03
IP protection)
IP20
Protection class (NEMA)
Other
Protection class
I
Voltage type
AC
Adjustability
Rotatable and pivotable
No reviews yet — your comment may be first.
All reviews 0
