Description
Features
Reviews
LED recessed downlight for the highest demands on technology and design. Die-cast aluminum housing designed as a heat sink. Square cover plate made of die-cast aluminum, powder-coated. The square version also has a round ceiling cutout. Tunable White dynamically adjustable from 2700 K to 6500 K. Tool-free installation thanks to spring fastening. With connected DALI DT8 operating device in a separate device box. With connecting cable L 250 mm. Through-wiring box (5-pin) available as an accessory.
| Property | Value |
| Max. System power: | 17 W |
| Rated luminous flux according to IEC 62722-2-1: | 1350 lm |
| Housing color: | white |
| Housing material: | aluminum |
| Protection class (IP): | IP20 |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | II |
| With light source: | yes |
| Installation height/depth: | 105 mm |
| With operating device: | yes |
| Suitable for recessed mounting: | yes |
| Length: | 130 mm |
| Width: | 130 mm |
| Height/depth: | 3 mm |
| With motion detector: | no |
| Color temperature: | 2700 to 6500 K |
| Nominal voltage: | 220 to 240 V |
| Suitable for lamp power: | 16 to 17 W |
| Beam angle: | wide beam 41-80° |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Light distribution: | symmetrical |
| Operating device: | LED operating device, current-controlled |
| Impact resistance: | IK03 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Suitable for number of lamps: | 1 |
| Luminous flux: | 1350 lm |
| Covering of the lamp with thermal insulation material possible: | no |
| Type of voltage: | AC |
| Light color: | multi-colored |
| Suitable for track mounting: | no |
| Adjustability: | not adjustable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for podium/floor mounting: | no |
| Suitable for truss mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | no |
| Suitable for cable system: | no |
| Surface: | powder-coated |
| Brushed surface: | no |
| LED nominal current at constant current: | 67 to 73 mA |
| Dimming depending on the operating device: | yes |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | yes |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Light distributor: | Reflector |
| Light emission: | direct |
| Protection class (NEMA): | other |
| Rated ambient temperature according to IEC62722-2-1: | -25 to 35 °C |
| Type of Wiring: | suitable for through-wiring |
| Power factor: | 0.97 |
| Number of poles: | 4 |
| Conductor cross-section: | 1.50 mm² |
| Connection type: | Plug-in terminal |
| Luminous efficacy: | 85 lm/W |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Glow wire test in accordance with IEC 60695-2-11: | 850 °C - 30 s |
| Photobiological safety according to EN 62471: | RG1 |
| Colour consistency (McAdam ellipse): | SDCM4 |
Features
HAB
Ledona Square IP20 16W 1300lm ws DA
Manufacturer
HAN
901531.002.2.76
GTIN
4051859459811
Covering the luminaire with thermal insulation material possible
No
Connection type
Plug-in terminal
Type of wiring
Suitable for through wiring
Beam angle
Wide beam 41-80°
Rated luminous flux according to IEC 62722-2-1
1350lm
Rated ambient temperature according to IEC62722-2-1
-25 to 35 °C
Operating device
LED control gear current controlled
Suitable for computer workstations according to EN 12464-1
No
Width
130 mm
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
Yes
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
Yes
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
No
Installation height/depth
105 mm
Color consistency (McAdam ellipse)
SDCM4
Color temperature
2700 to 6500 K
Color rendering index CRI
80-89
Version
Without
Suitable for surface mounting
No
Suitable for ceiling mounting
Yes
Suitable for flush mounting
Yes
Suitable for clamp mounting
No
Suitable for lamp power
16 to 17 W
Suitable for number of lamps
1
Suitable for pendulum suspension
No
Suitable for podium/floor mounting
No
Suitable for rope system
No
Suitable for busbar mounting
No
Suitable for truss mounting
No
Housing color
White
Glow wire test according to IEC 60695-2-11
850 °C - 30 s
Height/Depth
3 mm
LED nominal current at constant current
67 to 73 mA
Power factor
0.97
Conductor cross-section
1.50 mm²
Luminaire with limited surface temperature D-mark
No
Luminaire luminous efficacy
85lm/W
Lamps
LED not replaceable
Light emission
Direct
Light color
Multicolored
Luminous flux
1350lm
Light distributor
Reflector
Light distribution
Symmetrical
Length
130 mm
Max. system performance
17 W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
Nominal voltage
220 to 240 V
Surface
Powder coated
Brushed surface
No
Without dimming function
No
Photobiological safety according to EN 62471
RG1
Number of poles
4
Impact resistance
IK03
IP protection)
IP20
Protection class (NEMA)
Other
Protection class
II
Voltage type
AC
Adjustability
Not adjustable
Housing material
Aluminum
No reviews yet — your comment may be first.
All reviews 0
