High-quality recessed downlight. Die-cast aluminum ring with trumpet reflector. Darklight effect thanks to trumpet reflector, i.e. the light appears dark when switched on (when viewed from the side), no (turbo) grid is required for this. Harmonious illumination. Very good glare control. Energy savings of up to 65% compared to conventional fluorescent lamp downlights. Ra 85 as standard, Ra 95 also possible as an option. LED service life 50,000 h (L80, B10). Color tolerance: 2x MacAdam (2 SDCM). Converter suitable for direct current, suitable for central emergency power supply. Simple spring fastening for tool-free installation. Installation and cover ring made of die-cast aluminum. Cover ring with bayonet fastening. Installation frame made of powder-coated sheet steel. Heat sink made of extruded aluminum profile, black anodized. Trumpet reflector made of purest aluminum, matt. Ceiling fastening with spring system. LED converter in a separate control gear housing. With connected connecting cable between the light and the control gear housing 400 mm. Passive cooling. Suitable for through-wiring. Suitable for direct current and central emergency power supply. Light source (LED) included in delivery. Energy efficiency class A++
Property | Value |
Max. System power: | 10 W |
Rated luminous flux according to IEC 62722-2-1: | 1250 lm |
Housing color: | white |
Housing material: | aluminum |
Protection class (IP): | IP20 |
Outer diameter: | 156 mm |
Socket: | without |
Light source: | LED not replaceable |
Protection class: | II |
With light source: | yes |
Installation height/depth: | 155 mm |
With operating device: | yes |
Suitable for recessed mounting: | yes |
Height/depth: | 9 mm |
With motion detector: | no |
Color temperature: | 4000 K |
Nominal voltage: | 220 to 240 V |
Rated service life L80/B10 at 25 °C: | 50000 h |
Suitable for lamp power: | 10 W |
Beam angle: | medium beam 21-40° |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Light distribution: | symmetrical |
Operating device: | LED operating device, current-controlled |
Impact resistance: | IK03 |
Luminaire with limited surface temperature 'D-mark': | no |
Reflector: | matt |
Suitable for number of bulbs: | 1 |
Luminous flux: | 1250 lm |
Covering of the luminaire with thermal insulation material possible: | no |
Voltage type: | AC/DC |
Light color: | white |
Suitable for track mounting: | no |
Adjustability: | not adjustable |
Suitable for clamp mounting: | no |
Suitable for pendulum suspension: | no |
Suitable for podium/floor mounting: | no |
Suitable for truss mounting: | no |
With light sensor: | no |
Suitable for surface mounting: | no |
Suitable for cable system: | no |
Surface: | powder-coated |
Brushed surface: | no |
LED nominal current at constant current: | 42 to 45 mA |
Dimming depending on operating device: | yes |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming DALI: | yes |
Dimming DMX: | no |
Dimming DSI: | no |
Dimming potentiometer (device integrated): | no |
Dimming GPRS: | no |
Dimming LineSwitch: | no |
Dimming manufacturer-specific: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Without dimming function: | no |
Light distributor: | Reflector |
Light emission: | direct |
Total harmonic distortion (THD): | 0.10 |
Protection class (NEMA): | other |
Rated ambient temperature according to IEC62722-2-1: | -10 to 35 °C |
Type of wiring: | suitable for through wiring |
Power factor: | 0.95 |
Number of poles: | 5 |
Conductor cross-section: | 2.50 mm² |
Connection type: | Plug-in terminal |
Luminaire luminous efficacy: | 125 lm/W |
Suitable for computer workstations according to EN 12464-1: | yes |
Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
Photobiological safety according to EN 62471: | RG1 |
Color consistency (McAdam ellipse): | SDCM2 |