Delicately small dimensions. Replacement for 35 W and 50 W low-voltage recessed spotlights. LED service life 50,000 h (L70, B10). Color rendering index Ra > 80. Color tolerance: 4x MacAdam (4 SDCM). Two different beam angles. Can be flexibly aligned thanks to a 25° swivel range. Safety glass pane to protect the LED. Opal PMMA plastic pane included, can be optionally mounted without tools: to reduce direct glare for even, homogeneous light emission. Versions in dimmable DALI and for phase dimming. Powder-coated die-cast aluminum cover. Cold-extruded aluminum heat sink. Can be swiveled vertically by 25°. High-gloss anodized aluminum reflector. With protective pane. Ceiling attachment with spring system. External LED converter via plug connection. With connecting cable between light and LED converter 250 mm. Passive cooling. Light source (LED) included in delivery. LED converter included in delivery. Cover plate plastic (PMMA), opal, also included as an accessory. Energy efficiency class A+
Property | Value |
Max. System power: | 16 W |
Rated luminous flux according to IEC 62722-2-1: | 950 lm |
Housing color: | black |
Housing material: | aluminum |
Protection class (IP): | IP40 |
Outer diameter: | 91 mm |
Socket: | without |
Light source: | LED not replaceable |
Protection class: | II |
With light source: | yes |
Installation height/depth: | 95 mm |
With operating device: | yes |
Suitable for recessed mounting: | yes |
Height/depth: | 2 mm |
With motion detector: | no |
Color temperature: | 4000 K |
Nominal voltage: | 220 to 240 V |
Suitable for lamp power: | 16 W |
Beam angle: | wide beam 41-80° |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Light distribution: | symmetrical |
Operating device: | LED operating device, current-controlled |
Impact resistance: | IK06 |
Luminaire with limited surface temperature 'D-mark': | no |
Reflector: | high gloss |
Suitable for number of bulbs: | 1 |
Luminous flux: | 950 lm |
Cover material: | transparent plastic |
Covering of the lamp with thermal insulation material possible: | no |
Voltage type: | AC |
Light color: | white |
Suitable for track mounting: | no |
Adjustability: | not adjustable |
Suitable for clamp mounting: | no |
Suitable for pendulum suspension: | no |
Suitable for podium/floor mounting: | no |
Suitable for truss mounting: | no |
With light sensor: | no |
Suitable for surface mounting: | no |
Suitable for cable system: | no |
Surface: | powder-coated |
Brushed surface: | no |
LED nominal current at constant current: | 67 to 73 mA |
Dimming depending on operating device: | yes |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming DALI: | no |
Dimming DMX: | no |
Dimming DSI: | d>no|
Dimming potentiometer (device integrated): | no |
Dimming GPRS: | no |
Dimming LineSwitch: | no |
Dimming manufacturer-specific: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Without dimming function: | no |
Light distributor: | Reflector |
Light emission: | direct |
Protection class (NEMA): | other |
Rated ambient temperature according to IEC62722-2-1: | -20 to 25 °C |
Type of wiring: | Termination |
Power factor: | 0.95 |
Connection type: | other |
Luminaire luminous efficacy: | 60 lm/W |
Suitable for computer workstations according to EN 12464-1: | no |
Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
Photobiological safety according to EN 62471: | RG1 |
Color consistency (McAdam ellipse): | SDCM4 |