Decorative fabric lampshade for interior design. The basic lamp for the fabric lampshades is the Toledo Flat series. Over 70 different standard colors of the fabric lampshade to choose from. Standard shapes are cylinder and cuboid. Material of the fabric lampshade: chintz or optionally also flame-retardant fabric in accordance with B1. Fabric lampshade can be retrofitted to the base lamp without tools. Optional satin-finished cover panels made of polycarbonate available. Energy-efficient decorative lamp thanks to LED fittings. LED service life 50,000 h (L70, B10). Color rendering Ra > 80. Color tolerance: 4-fold MacAdam (4 SDCM). DALI converter suitable for direct current, suitable for central emergency power supply. Ceiling or pendant mounting. Cylindrical housing made of powder-coated sheet steel. Cover ring made of powder-coated die-cast aluminum. Light guide and plastic cover made of non-yellowing plastic (PMMA). Cover made of opal matt plastic. With fastening system for fabric lampshades. LED converter included in delivery. Light source (LED) included. Energy efficiency class A+
| Property | Value |
| Max. System power: | 5 W |
| Rated luminous flux according to IEC 62722-2-1: | 360 lm |
| Suitable for number of lamps: | 1 |
| Height/depth: | 65 mm |
| Protection rating (IP): | IP40 |
| Protection class: | II |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 220 to 240 V |
| Housing color: | white |
| Material of the Housing: | Aluminum |
| Color temperature: | 4000 K |
| Impact resistance: | IK06 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for wall mounting: | no |
| Outer diameter: | 160 mm |
| Voltage type: | AC |
| With motion detector: | no |
| Beam angle: | wide beam 41-80° |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 35 °C |
| Socket: | other |
| Connection type: | screw terminal |
| With control gear: | yes |
| Cover material: | opal plastic |
| Light distributor: | without |
| Without Dimming function: | yes |
| Light emission: | direct/indirect |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | LED operating device, current-controlled |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | yes |
| Suitable for light strip configuration: | no |
| Suitable for pendant suspension: | no |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | no |
| Design of the grid: | without |
| Covering of the luminaire with thermal insulation material possible: | yes |
| Dimming DMX: | no |
| Dimming DSI: | no |
| With air slots: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (integrated in the device): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Suitable for lamp power: | 5 W |
| Luminaire luminous efficacy: | 72 lm/W |
| Power factor: | 0.50 |
| Wiring type: | Termination |
| Number of poles: | 2 |
| Conductor cross-section: | 1.50 mm² |
