Decorative fabric lampshade for interior design. The basic lamp for the fabric lampshades is the Toledo Flat series. Over 70 different standard colors of the fabric lampshade to choose from. Standard shapes are cylinder and cuboid. Material of the fabric lampshade: chintz or optionally also flame-retardant fabric in accordance with B1. Fabric lampshade can be retrofitted to the base lamp without tools. Optional satin-finished cover panels made of polycarbonate available. Energy-efficient decorative lamp thanks to LED fittings. LED service life 50,000 h (L70, B10). Color rendering Ra > 80. Color tolerance: 4x MacAdam (4 SDCM). DALI converter suitable for direct current, suitable for central emergency power supply. Ceiling or pendant mounting. Ceiling canopy made of powder-coated sheet steel. Pendant cable with integrated steel cable. Cylindrical housing made of powder-coated sheet steel. Cover ring made of powder-coated die-cast aluminum. Light guide and plastic cover made of non-yellowing plastic (PMMA). Cover made of opal matt plastic. With fastening system for fabric shades. Control gear built in. Light source (LED) included in delivery. Energy efficiency class A+
| Property | Value |
| Max. System power: | 5 W |
| Rated luminous flux according to IEC 62722-2-1: | 360 lm |
| Color temperature: | 4000 K |
| Diameter: | 162 mm |
| Socket: | without |
| Suitable for number of bulbs: | 1 |
| Height/depth: | 90 mm |
| Protection class (IP): | IP20 |
| Protection class: | I |
| Pendant length: | 2000 mm |
| Operating device: | LED operating device, current-controlled |
| Housing material: | Aluminum |
| Suitable for computer workstations in accordance with EN 12464-1: | yes |
| With light source: | yes |
| With operating device: | yes |
| Nominal voltage: | 220 to 240 V |
| Suspension included: | yes |
| Cover material: | opal plastic |
| Light source: | LED not replaceable |
| Housing color: | white |
| Grid design: | without |
| Reflector: | without |
| Suitable for strip light configuration: | no |
| Direct/indirect components can be controlled separately: | no |
| Light distribution: | symmetrical |
| Light emission: | direct/indirect |
| Impact resistance: | IK06 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Color rendering index CRI: | 80-89 |
| Suitable for emergency lighting: | no |
| Light color: | white |
| Voltage type: | AC |
| LED nominal current at constant current: | 21 to 23 mA |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming programmable: | no |
| Dimming DSI: | no |
| Dimming RF: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming Trailing edge phase control: | no |
| Dimming leading edge phase control: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Without Dimming function: | yes |
| Light distributor: | without |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Suitable for lamp power: | 5 W |
| Power factor: | 0.50 |
| Type of wiring: | Termination |
| Number of poles: | 3 |
| Conductor cross-section: | 1.50 mm² |
| Connection type: | other |
