High-quality recessed downlight. Galvanized sheet steel retaining bracket. Die-cast aluminum inner ring and end ring. Brilliantly shining corona on the light exit surface thanks to the specially designed die-cast aluminum ring as a reflector end. Reflector made of MIRO-SILVER® with 98% total light reflection. Patented round design shaped like a truncated cone. MultiLumen: 16 different luminous fluxes can be set on site in approx. 200 lm increments using DIP switches on the separate operating device. Tool-free installation thanks to spring fastening. Through-wiring box (5-pin) available as an accessory. Possible accessories - order separately: Extensive selection of accessory panels - can be retrofitted without tools. With the appropriate cover panels, Pascala achieves protection class IP 54.
| Property | Value |
| Max. System power: | 39 W |
| Rated luminous flux according to IEC 62722-2-1: | 1400 lm |
| Housing color: | white |
| Housing material: | aluminum |
| Protection class (IP): | IP20 |
| Outer diameter: | 241 mm |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | II |
| With light source: | yes |
| Installation height/depth: | 160 mm |
| With operating device: | yes |
| Suitable for recessed mounting: | yes |
| Height/depth: | 2 mm |
| With motion detector: | no |
| Color temperature: | 3000 K |
| Nominal voltage: | 220 to 240 V |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for lamp power: | 11 to 39 W |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Light distribution: | asymmetrical |
| Operating device: | LED operating device, current-controlled |
| Impact resistance: | IK03 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Reflector: | other |
| Suitable for number of bulbs: | 1 |
| Luminous flux: | 1400 lm |
| Covering of the lamp with thermal insulation material possible: | no |
| Type of voltage: | AC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | not adjustable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for podium/floor mounting: | no |
| Suitable for traverse mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | no |
| Suitable for cable system: | no |
| Surface: | galvanized |
| Brushed surface: | no |
| LED nominal current at constant current: | 46 to 50 mA |
| Dimming depending on the operating device: | no |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| no | |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Light distributor: | Reflector |
| Light emission: | direct |
| Total harmonic distortion (THD): | 0.10 |
| Protection class (NEMA): | other |
| Rated ambient temperature according to IEC62722-2-1: | -25 to 35 °C |
| Wiring type: | Termination |
| Power factor: | 0.95 |
| Number of poles: | 2 |
| Conductor cross-section: | 1.50 mm² |
| Connection type: | Plug-in terminal |
| Luminous efficacy: | 128 lm/W |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
| Photobiological safety according to EN 62471: | RG1 |
| Colour consistency (McAdam ellipse): | SDCM2 |








