High-quality recessed downlight. Galvanized sheet steel retaining bracket. Die-cast aluminum inner ring and end ring. Brilliantly shining corona on the light exit surface thanks to the specially designed die-cast aluminum ring as a reflector end. Reflector made of MIRO-SILVER® with 98% total light reflection. Patented round design shaped like a truncated cone. MultiLumen: 16 different luminous fluxes can be set on site in approx. 200 lm increments using DIP switches on the separate operating device. Tool-free installation thanks to spring fastening. Through-wiring box (5-pin) available as an accessory. Possible accessories - order separately: Extensive selection of accessory panels - can be retrofitted without tools. With the appropriate cover panels, Pascala achieves protection class IP 54.
Property | Value |
Max. System power: | 39 W |
Rated luminous flux according to IEC 62722-2-1: | 1400 lm |
Housing color: | Silver |
Housing material: | Aluminum |
Protection class (IP): | IP20 |
Outer diameter: | 241 mm |
Socket: | without |
Light source: | LED not replaceable |
Protection class: | II |
With light source: | yes |
Installation height/depth: | 160 mm |
With operating device: | yes |
Suitable for recessed mounting: | yes |
Height/depth: | 2 mm |
With motion detector: | no |
Color temperature: | 3000 K |
Nominal voltage: | 220 to 240 V |
Rated service life L80/B10 at 25 °C: | 50000 h |
Suitable for lamp power: | 11 to 39 W |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Light distribution: | asymmetrical |
Operating device: | LED operating device, current-controlled |
Impact resistance: | IK03 |
Luminaire with limited surface temperature 'D-mark': | no |
Reflector: | other |
Suitable for number of bulbs: | 1 |
Luminous flux: | 1400 lm |
Covering of the lamp with thermal insulation material possible: | no |
Type of voltage: | AC |
Light color: | white |
Suitable for track mounting: | no |
Adjustability: | not adjustable |
Suitable for clamp mounting: | no |
Suitable for pendulum suspension: | no |
Suitable for podium/floor mounting: | no |
Suitable for traverse mounting: | no |
With light sensor: | no |
Suitable for surface mounting: | no |
Suitable for cable system: | no |
Surface: | galvanized |
Brushed surface: | no |
LED nominal current at constant current: | 46 to 50 mA |
Dimming depending on the operating device: | yes |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming DALI: | yes |
Dimming DMX: | no |
Dimming DSI: | no |
Dimming potentiometer (device integrated): | no |
Dimming GPRS: | no |
Dimming LineSwitch: | no |
Dimming manufacturer-specific: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Without dimming function: | no |
Light distributor: | Reflector |
Light emission: | direct |
Total harmonic distortion (THD): | 0.10 |
Protection class (NEMA): | other |
Rated ambient temperature according to IEC62722-2-1: | -25 to 25 °C |
Type of wiring: | suitable for through wiring |
Power factor: | 0.95 |
Number of poles: | 4 |
Conductor cross-section: | 1.50 mm² |
Connection type: | Plug-in terminal |
Luminous efficacy: | 128 lm/W |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
Photobiological safety according to EN 62471: | RG1 |
Colour consistency (McAdam ellipse): | SDCM2 |