Description
Features
Reviews
Super-flat square downlight suitable for recessed and surface mounting. Housing made of UV-resistant plastic (polycarbonate). Perfect thermal management using an aluminum heat sink. Clear plastic diffuser with opal reflector film. Lateral light coupling (RZB SIDELITE® technology) for above-average homogeneous luminance distribution. MultiColour: color temperature 3000 K or 4000 K can be individually adjusted using the rear switching element. Factory-set to 4000 K. MultiLumen: luminaire luminous flux can be adjusted in 3 levels. Factory-set to the highest luminaire luminous flux. MultiCutOut: various ceiling cutouts can be individually adjusted using the adjustable spring fastening. Suitable for ceiling cutouts from 65 to 205 mm. Suitable for recessed ceiling mounting and for surface mounting on the ceiling and wall. Suitable for through-wiring. Operating device integrated.
| Property | Value |
| Max. System power: | 15 W |
| Housing color: | white |
| Protection class (IP): | IP20 |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | II |
| With light source: | yes |
| Installation height/depth: | 82 mm |
| With Operating device: | yes |
| Suitable for built-in installation: | yes |
| Length: | 235 mm |
| Width: | 235 mm |
| Height/depth: | 22 mm |
| With motion detector: | no |
| Color temperature: | 3000 to 4000 K |
| Nominal voltage: | 220 to 240 V |
| Suitable for lamp power: | 9 to 15 W |
| Beam angle: | extremely wide beam >80° |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Light distribution: | symmetrical |
| Operating device: | LED operating device current-controlled |
| Impact resistance: | IK02 |
| Luminaire with limited Surface temperature 'D-mark': | no |
| Reflector: | other |
| Suitable for number of bulbs: | 1 |
| Cover material: | opal plastic |
| Covering of the lamp with thermal insulation material possible: | yes |
| Voltage type: | AC |
| Suitable for track mounting: | no |
| Adjustability: | not adjustable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for platform/floor mounting: | no |
| Suitable for truss mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | yes |
| Suitable for cable system: | no |
| Surface: | other |
| Brushed surface: | no |
| LED nominal current at constant current: | 38 to 41 mA |
| Dimming depending on the operating device: | no |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming phase control: | no |
| Dimming phase control: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without Dimming function: | yes |
| Light distributor: | reflector |
| Light emission: | direct |
| Rated service life L70/B50 at 25 °C: | 40000 h |
| Protection class (NEMA): | other |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 40 °C |
| Type of wiring: | suitable for through wiring |
| Power factor: | 0.90 |
| Number of poles: | 2 |
| Conductor cross-section: | 1.50 mm² |
| Connection type: | Plug-in terminal |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Glow wire test in accordance with IEC 60695-2-11: | 650 °C - 30 s |
| Photobiological safety in accordance with EN 62471: | RG1 |
| Color consistency (McAdam ellipse): | SDCM4 |
Features
HAB
Trixy/E 9/12/15W-3000/4000K 235x235
Manufacturer
HAN
901722.002
GTIN
4051859768913
Covering the luminaire with thermal insulation material possible
Yes
Connection type
Plug-in terminal
Type of wiring
Suitable for through wiring
Rated lifetime L70/B50 at 25 °C
40000 hours
Rated ambient temperature according to IEC62722-2-1
-20 to 40 °C
Operating device
LED control gear current controlled
Suitable for computer workstations according to EN 12464-1
No
Width
235 mm
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
No
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
No
Installation height/depth
82 mm
Color consistency (McAdam ellipse)
SDCM4
Color temperature
3000 to 4000 K
Color rendering index CRI
80-89
Version
Without
Suitable for surface mounting
Yes
Suitable for ceiling mounting
Yes
Suitable for flush mounting
Yes
Suitable for clamp mounting
No
Suitable for lamp power
9 to 15 W
Suitable for number of lamps
1
Suitable for pendulum suspension
No
Suitable for podium/floor mounting
No
Suitable for rope system
No
Suitable for busbar mounting
No
Suitable for truss mounting
No
Housing color
White
Glow wire test according to IEC 60695-2-11
650 °C - 30 s
Height/Depth
22 mm
LED nominal current at constant current
38 to 41 mA
Power factor
0.90
Conductor cross-section
1.50 mm²
Luminaire with limited surface temperature D-mark
No
Lamps
LED not replaceable
Light emission
Direct
Light distributor
Reflector
Light distribution
Symmetrical
Length
235 mm
Max. system performance
15W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
Nominal voltage
220 to 240 V
Surface
Other
Brushed surface
No
Without dimming function
Yes
Photobiological safety according to EN 62471
RG1
Number of poles
2
Reflector
Other
Impact resistance
IK02
IP protection)
IP20
Protection class (NEMA)
Other
Protection class
II
Voltage type
AC
Adjustability
Not adjustable
Cover material
Plastic opal
No reviews yet — your comment may be first.
All reviews 0
