Description
Features
Reviews
Insert/recessed surface spotlight. Housing made of powder-coated sheet steel. Can be pivoted vertically by 90°. Highly efficient LED units with flush opal diffuser made of non-yellowing PMMA. Light emission: symmetrical, wide beam. Suitable for insertion in module 600 grid ceilings. Includes connected operating device in a separate device box. Suitable for through-wiring. MultiLumen: The luminous flux of the luminaire can be adjusted in 3 levels. Accessories: Installation frame for mounting in suspended ceilings.
| Property | Value |
| Max. System power: | 31 W |
| Rated luminous flux according to IEC 62722-2-1: | 1700 lm |
| Housing color: | black |
| Protection class (IP): | IP20 |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | I |
| With light source: | yes |
| Installation height/depth: | 100 mm |
| With operating device: | yes |
| Suitable for recessed mounting: | yes |
| Length: | 597 mm |
| Width: | 116 mm |
| Height/depth: | 39 mm |
| With motion detector: | no |
| Color temperature: | 2700 K |
| Nominal voltage: | 220 to 240 V |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for lamp power: | 16 to 31 W |
| Beam angle: | extremely wide beam >80° |
| Color rendering index CRI: | 90-100 |
| Suitable for ceiling mounting: | yes |
| Light distribution: | symmetrical |
| Operating device: | LED operating device, current-controlled |
| Impact resistance: | IK03 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Reflector: | without |
| Suitable for number of lamps: | 1 |
| Installation width: | 98 mm |
| Installation length: | 577 mm |
| Luminous flux: | 1700 lm |
| Covering the lamp with thermal insulation material possible: | no |
| Voltage type: | AC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | pivotable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for podium/floor mounting: | no |
| Suitable for truss mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | no |
| Suitable for cable system: | no |
| Surface: | powder-coated |
| Brushed surface: | no |
| LED nominal current at constant current: | 67 to 73 mA |
| Dimming depending on the operating device: | no |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (integrated in the device): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Light distributor: | without |
| Light output: | direct |
| Total harmonic distortion (THD): | 0.20 |
| Degree of protection (NEMA): | other |
| Rated ambient temperature according to IEC62722-2-1: | 5 to 25 °C |
| Type of wiring: | suitable for through wiring |
| Power factor: | 0.90 |
| Number of poles: | 3 |
| Conductor cross-section: | 1.50 mm² |
| Connection type: | Plug-in terminal |
| Luminous efficacy: | 107 lm/W |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Glow wire test in accordance with IEC 60695-2-11: | 850 °C - 30 s |
| Photobiological safety in accordance with EN 62471: | RG1 |
| Color consistency (McAdam ellipse): | SDCM3 |
Features
Total harmonic distortion (THD)
0.20
HAB
TX-Move/31W-927 597x116x3
Manufacturer
HAN
901727.003.2
GTIN
4051859937692
Covering the luminaire with thermal insulation material possible
No
Connection type
Plug-in terminal
Type of wiring
Suitable for through wiring
Rated lifetime L80/B10 at 25 °C
50000 hours
Rated luminous flux according to IEC 62722-2-1
1700lm
Rated ambient temperature according to IEC62722-2-1
5 to 25 °C
Operating device
LED control gear current controlled
Suitable for computer workstations according to EN 12464-1
No
Width
116 mm
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
No
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
No
Installation width
98 mm
Installation height/depth
100 mm
Installation length
577 mm
Color consistency (McAdam ellipse)
SDCM3
Color temperature
2700K
Color rendering index CRI
90-100
Version
Without
Suitable for surface mounting
No
Suitable for ceiling mounting
Yes
Suitable for flush mounting
Yes
Suitable for clamp mounting
No
Suitable for lamp power
16 to 31 W
Suitable for number of lamps
1
Suitable for pendulum suspension
No
Suitable for podium/floor mounting
No
Suitable for rope system
No
Suitable for busbar mounting
No
Suitable for truss mounting
No
Housing color
Black
Glow wire test according to IEC 60695-2-11
850 °C - 30 s
Height/Depth
39 mm
LED nominal current at constant current
67 to 73 mA
Power factor
0.90
Conductor cross-section
1.50 mm²
Luminaire with limited surface temperature D-mark
No
Luminaire luminous efficacy
107lm/W
Lamps
LED not replaceable
Light emission
Direct
Light color
White
Luminous flux
1700lm
Light distributor
Without
Light distribution
Symmetrical
Length
597 mm
Max. system performance
31 W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
Nominal voltage
220 to 240 V
Surface
Powder coated
Brushed surface
No
Without dimming function
Yes
Photobiological safety according to EN 62471
RG1
Number of poles
3
Reflector
Without
Impact resistance
IK03
IP protection)
IP20
Protection class (NEMA)
Other
Protection class
I
Voltage type
AC
Adjustability
Swiveling
No reviews yet — your comment may be first.
All reviews 0
