Die-cast aluminum recessed spotlight with very small dimensions. 68 mm ceiling cut-out for standard hole cutters. With external through-wiring box for phase dimming. LED converter connection via plug-in connection with 300 mm connecting cable for phase dimming. Hybrid optics system with lens and reflector for homogeneous illumination. Replacement for 35 W and 50 W low-voltage downlights. Dim to warm versions: when dimmed, the light color changes dynamically from 3000 K to 1800 K, creating a cozy, comfortable lighting ambience. Color rendering index Ra > 80 for monochrome standard LED, color rendering index Ra 97 for dim to warm. LED service life: for monochrome standard LED 50,000 h (L70, B50), for dim to warm 25,000 h (L70, B50). Can be flexibly aligned thanks to a 25° swivel range. Versions with monochrome standard LED, dimmable DALI or for phase dimming. Cover made of die-cast aluminum, powder-coated. Heat sink made of aluminum. Can be swiveled vertically by 25°. Passive cooling. Hybrid optics system with lens made of plastic (polycarbonate) and reflector. Ceiling mounting with spring system. External LED converter. With connecting cable between the light and the LED converter 300 mm. Light source (LED) included in delivery. LED converter included in delivery. Energy efficiency class A+
| Property | Value |
| Max. System power: | 11 W |
| Rated luminous flux according to IEC 62722-2-1: | 900 lm |
| Housing color: | Silver |
| Housing material: | Aluminum |
| Protection class (IP): | IP20 |
| Outer diameter: | 80 mm |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | II |
| With light source: | yes |
| Installation height/depth: | 69 mm |
| With operating device: | yes |
| Suitable for recessed mounting: | yes |
| Height/depth: | 2 mm |
| With motion detector: | no |
| Color temperature: | 4000 K |
| Nominal voltage: | 220 to 240 V |
| Suitable for lamp power: | 11 W |
| Beam angle: | medium beam 21-40° |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Light distribution: | symmetrical |
| Operating device: | LED operating device, current-controlled |
| Impact resistance: | IK03 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Suitable for number of bulbs: | 1 |
| Luminous flux: | 900 lm |
| Cover material: | transparent plastic |
| Covering of the lamp with thermal insulation material possible: | no |
| Voltage type: | AC/DC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | pivotable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for platform/floor mounting: | no |
| Suitable for truss mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | no |
| Suitable for cable system: | no |
| Surface: | powder-coated |
| Brushed surface: | no |
| LED nominal current at constant current: | 46 to 50 mA |
| Dimming depending on the operating device: | yes |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | yes |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (device-integrated grated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Light distributor: | Reflector |
| Light emission: | direct |
| Total harmonic distortion (THD): | 0.10 |
| Rated service life L70/B50 at 25 °C: | 50000 h |
| Protection class (NEMA): | other |
| Rated ambient temperature according to IEC62722-2-1: | 25 °C |
| Type of wiring: | Termination |
| Power factor: | 0.95 |
| Number of poles: | 4 |
| Conductor cross-section: | 1.50 mm² |
| Connection type: | Plug-in terminal |
| Luminaire luminous efficacy: | 82 lm/W |
| Suitable for computer workstations according to EN 12464-1: | no |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Photobiological safety according to EN 62471: | RG1 |
| Color consistency (McAdam ellipse): | SDCM3 |
