Description
Features
Reviews
Super-flat LED surface-mounted downlight for high demands. Cylinder housing made of powder-coated sheet steel. Cover ring made of powder-coated die-cast aluminum. Diffuser made of durable polycarbonate (PC) with a smooth surface on the room side for low sensitivity to dirt and to prevent the settlement of germs and bacteria. No direct glare thanks to the satin-finished microprismatic diffuser. Suitable for ceiling mounting or wall mounting. Integrated operating device.
| Property | Value |
| Max. System power: | 26 W |
| Rated luminous flux according to IEC 62722-2-1: | 2650 lm |
| Housing color: | white |
| Protection class (IP): | IP40 |
| Outer diameter: | 500 mm |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | II |
| With light source: | yes |
| With operating device: | yes |
| Suitable for recessed mounting: | no |
| Height/depth: | 63 mm |
| With motion detector: | no |
| Color temperature: | 3000 K |
| Nominal voltage: | 220 to 240 V |
| Suitable for lamp power: | 26 W |
| Beam angle: | extremely wide beam >80° |
| Color rendering index CRI: | 90-100 |
| Suitable for ceiling mounting: | yes |
| Light distribution: | symmetrical |
| Operating device: | LED operating device current-controlled |
| Impact resistance: | IK06 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Reflector: | without |
| Suitable for number of bulbs: | 1 |
| Luminous flux: | 2650 lm |
| Cover material: | structured plastic |
| Covering of the lamp with thermal insulation material possible: | yes |
| Voltage type: | AC/DC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | not adjustable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for podium/floor mounting: | no |
| Suitable for traverse mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | yes |
| Suitable for Cable system: | no |
| Surface: | powder-coated |
| Brushed surface: | no |
| LED nominal current at constant current: | 108 to 118 mA |
| Dimming depending on the operating device: | yes |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | yes |
| DMX dimming: | no |
| DSI dimming: | no |
| Potentiometer dimming (device-integrated): | no |
| GPRS dimming: | no |
| LineSwitch dimming: | no |
| Manufacturer-specific dimming: | no |
| Mains voltage modulation dimming: | no |
| Dimming phase control: | no |
| Dimming phase control: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Light distributor: | other |
| Light emission: | direct |
| Total harmonic distortion (THD): | 0.10 |
| Protection class (NEMA): | other |
| Rated ambient temperature according to IEC62722-2-1: | -20 to 30 °C |
| Type of wiring: | suitable for through wiring |
| Power factor: | 0.95 |
| Number of poles: | 4 |
| Conductor cross-section: | 1.50 mm² |
| Connection type: | Plug-in terminal |
| Luminous efficacy: | 102 lm/W |
| Suitable for computer workstations in accordance with EN 12464-1: | yes |
| Glow wire test in accordance with IEC 60695-2-11: | 650 °C - 30 s |
| Photobiological safety according to EN 62471: | RG1 |
| Colour consistency (McAdam ellipse): | SDCM3 |
Features
Total harmonic distortion (THD)
0.10
HAB
Toledo Flat UGR19 26W 2650lm 930 ws DALI
Manufacturer
HAN
901720.002.76
GTIN
4051859725381
Covering the luminaire with thermal insulation material possible
Yes
Connection type
Plug-in terminal
Type of wiring
Suitable for through wiring
Outer diameter
500 mm
Rated luminous flux according to IEC 62722-2-1
2650lm
Rated ambient temperature according to IEC62722-2-1
-20 to 30 °C
Operating device
LED control gear current controlled
Suitable for computer workstations according to EN 12464-1
Yes
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
Yes
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
Yes
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
No
Color consistency (McAdam ellipse)
SDCM3
Color temperature
3000K
Color rendering index CRI
90-100
Version
Without
Suitable for surface mounting
Yes
Suitable for ceiling mounting
Yes
Suitable for flush mounting
No
Suitable for clamp mounting
No
Suitable for lamp power
26W
Suitable for number of lamps
1
Suitable for pendulum suspension
No
Suitable for podium/floor mounting
No
Suitable for rope system
No
Suitable for busbar mounting
No
Suitable for truss mounting
No
Housing color
White
Glow wire test according to IEC 60695-2-11
650 °C - 30 s
Height/Depth
63 mm
LED nominal current at constant current
108 to 118 mA
Power factor
0.95
Conductor cross-section
1.50 mm²
Luminaire with limited surface temperature D-mark
No
Luminaire luminous efficacy
102lm/W
Lamps
LED not replaceable
Light emission
Direct
Light color
White
Luminous flux
2650lm
Light distributor
Other
Light distribution
Symmetrical
Max. system performance
26W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
Nominal voltage
220 to 240 V
Surface
Powder coated
Brushed surface
No
Without dimming function
No
Photobiological safety according to EN 62471
RG1
Number of poles
4
Reflector
Without
Impact resistance
IK06
IP protection)
IP40
Protection class (NEMA)
Other
Protection class
II
Voltage type
AC/DC
Adjustability
Not adjustable
Cover material
Plastic structured
No reviews yet — your comment may be first.
All reviews 0
ESYLUX EP10424885 DALI-2 presence detector PD-C | 360°, 32 m, BMS flush-mounted
€114.47
Ordered on demand
