For pipe laying: the ESD is a *clip-on* for the EC Euro-Clip and is snapped onto this and inserted into a 6 mm drill hole, suitable for laying on plasterboard/Fermacell, concrete, limestone, brick or Ytong, or e.g. in the case of temporary construction, a bundle of cables can also be attached using cable ties, cable tie feedthrough up to a maximum of 4.5 mm wide, for laying on plasterboard walls up to 12.5 mm, the outside of the wall remains undamaged, dowel length 11 mm, the principle of the Schnabl plug-in technology is based on the patented Euro plug-in dowel - dowels and screws are not required, the ESD is simply inserted into a 6 mm drill hole - without tools and with little effort. Eccentric pairs are arranged on the plastic shaft - these expansion bodies form a force-locking connection with the drill hole wall, the holding force increases with increasing load. Disassembly is done by simply unscrewing, light grey, halogen-free, PA 6, UV-stabilised, temperature range: -20 degrees C to +85 degrees C, silicone-free
