Description
This transformer transmits alternating current. The design of the housing is more like a contactor than a classic transformer and thus enhances the control cabinet. The input voltage is 230 VAC or 400 VAC and can be adjusted by +/-15 VAC. The supply comes from a 1-phase network or between 2 phases of a 3-phase network. On the output side, 2 independent 115 VAC at 25 VA are available via a double winding. Using jumpers, the output voltages can optionally be connected in parallel to increase the power or in series to increase the voltage. The mains frequency is 50/60 Hz. It is attached to a mounting plate with 4 screws. An LED display provides information about the status.
| Property | Value |
| Power: | 25.0 VA |
| Height: | 98.0 mm |
| Width: | 87.0 mm |
| Depth: | 108.0 mm |
| Primary voltage 1: | 230.0 V |
| Secondary voltage 1: | 115.0 to 230.0 V |
| Protection class (IP): | other |
| Suitable for series installation: | no |
| Short-circuit proof: | no |
| Primary voltage 2: | 400.0 V |
| Designed as an isolating transformer: | no |
| Toroidal core: | no |
| Insulation class according to IEC 85: | A |
| Suitable for circuit board mounting: | no |
| Designed as a safety transformer: | no |
| Designed as an economy transformer: | no |
| Conductor material: | other |
Features
Short circuit proof
No
Conductor material
Other
Secondary voltage 1
115.0 to 230.0 V
HAB
ABT7PDU002G Uni 230/400VAC 2X115VAC 25VA
Manufacturer
HAN
ABT7PDU002G
GTIN
3389119401173
Width
87.0 mm
Suitable for series installation
No
Height
98.0 mm
Performance
25.0VA
IP protection)
Other
Depth
108.0 mm
Reviews
No reviews yet — your comment may be first.
All reviews 0
