Description
Features
Reviews
This transformer transmits alternating current. The design of the housing is more like a contactor than a classic transformer and thus enhances the control cabinet. The input voltage is 230 VAC or 400 VAC and can be adjusted by +/-15 VAC. The supply comes from a 1-phase network or between 2 phases of a 3-phase network. On the output side, 2 independent 115 VAC at 250 VA are available via a double winding. Using jumpers, the output voltages can optionally be connected in parallel to increase the power or in series to increase the voltage. The mains frequency is 50/60 Hz. It is attached to a mounting plate with 4 screws. An LED display provides information about the status.
| Property | Value |
| Power: | 250.0 VA |
| Height: | 142.0 mm |
| Width: | 123.0 mm |
| Depth: | 153.0 mm |
| Primary voltage 1: | 230.0 V |
| Secondary voltage 1: | 115.0 to 230.0 V |
| Protection class (IP): | other |
| Suitable for series installation: | no |
| Short-circuit proof: | no |
| Primary voltage 2: | 400.0 V |
| Designed as an isolating transformer: | no |
| Toroidal core: | no |
| Insulation class according to IEC 85: | A |
| Suitable for circuit board mounting: | no |
| Designed as a safety transformer: | no |
| Designed as an economy transformer: | no |
| Conductor material: | other |
Features
Short circuit proof
No
Conductor material
Other
Secondary voltage 1
115.0 to 230.0 V
HAB
ABT7PDU025G Uni 230/400VAC 2X115VAC250VA
Manufacturer
HAN
ABT7PDU025G
GTIN
3389119401227
Width
123.0 mm
Suitable for series installation
No
Height
142.0 mm
Performance
250.0VA
IP protection)
Other
Depth
153.0 mm
No reviews yet — your comment may be first.
All reviews 0
