The Harmony XPS Universal safety relays are ideal for use in a variety of safety applications thanks to their selectable safety function and start option using rotary switches on the front. This reduces the variety of devices required and the diagnostic function allows states to be easily transferred to a PLC so that downtimes are reduced in the event of a fault thanks to clear error information. The required function can be easily set from 10 selectable safety functions. Mechanical contacts from emergency stop/stop buttons, position or magnetic switches, safety mats as well as electronic PNP/NPN sensors, light curtains or RFID safety switches with OSSD outputs can be connected to the inputs. A safety function can be operated via the two inputs in a two-channel (redundant) version. Automatic, manual or monitored start as well as an optional start-up test are available for the start function. This safety switching device has 3 safe, undelayed relay contacts as output and optionally 3 safe, delayed contacts, 1 break contact and 1 semiconductor signal output, as well as 1 diagnostic message. The switch-off delayed time functions (e.g. stop category 1 or 2, SS1 or SS2) can be set in steps from 0.1 second to 15 minutes. With the help of the qualified diagnostics, states and errors are detected and transmitted to a standard input of a PLC using a telegram via direct wiring. A ready-made function block for common control systems evaluates these messages so that the operator is comprehensively informed on the machine display. The supply voltage is 48-240 VAC/DC and the connections are made via removable screw terminals. Applications up to safety level PL e in category 4 or SIL3 can be realized. If the number of outputs is to be increased, the XPSUEP extension can simply be connected to the side via an integrated connector, saving time by dispensing with cross-wiring. Installation is carried out by snapping it onto a top hat rail or screwing it onto mounting plates. A uniquely numbered locking strap is included to protect the settings under the transparent cover. A wide range of approvals enable international use. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
| Property | Value |
| Number of outputs, safety-related, instantaneous, contact-based: | 3.0 |
| Safety type according to IEC 61496-1: | 4 |
| Number of outputs, signaling function, delayed, contact-based: | 0.0 |
| Suitable for monitoring position switches: | yes |
| Suitable for monitoring Proximity switches: | yes |
| Evaluation of inputs: | two-channel |
| With TÜV approval: | yes |
| Number of outputs, safety-related, delayed, contact-based: | 4.0 |
| Number of outputs, safety-related, delayed, semiconductor: | 0.0 |
| Suitable for monitoring magnetic switches: | yes |
| With UL approval: | yes |
| With muting function: | no |
| Rail mounting possible: | yes |
| Number of outputs, signaling function, undelayed, contact-based: | 0.0 |
| Performance level according to EN ISO 13849-1: | Level e |
| Design: | Basic device |
| Number of outputs, signaling function, delayed, semiconductor: | 0.0 |
| Design of the electrical connection: | screw connection |
| Number of outputs, safety-related, undelayed, semiconductor: | 0.0 |
| Suitable for monitoring optoelectronic protective devices: | yes |
| Number of outputs, signaling function, undelayed, semiconductor: | 0.0 |
| Stop category according to IEC 60204: | 0 + 1 |
| Suitable for monitoring EMERGENCY STOP circuits: | yes |
| Suitable for monitoring valves: | no |
| Suitable for monitoring tactile sensors: | no |
| With approval for BG BIA: | no |
| Width: | 45.0 mm |
| Height: | 100.0 mm |
| Depth: | 120.0 mm |
| With removable terminals: | yes |
| With start input: | yes |
| With feedback circuit: | yes |
| Release delay: | 0.0 to 900.0 s |
| SIL according to IEC 61508: | 3 |
