Two outputs for switching and dimming resistive, inductive or capacitive loads, - Automatic adjustment to leading edge or trailing edge control, depending on the connected load type, - Rated operating voltage AC 230 V, - Rated frequency: 50...60 Hz, - Rated power at +35 °C ambient temperature: 300 VA per output or 500 VA when using only one output, with no required minimum load per output, - Electronic protection per output against overload, short circuit and overtemperature, - Screw terminals for connecting untreated single-wire, fine-wire and multi-wire conductors, 0.5... 2.5 mm2, - Two-colour LED to display the switching status (red = on, green = off) or an error (flashing orange) per output, - Electronics operated via bus voltage, - Integrated bus coupler, bus connection via Bus terminal, - DIN rail device for mounting on TH35 DIN EN 60715 rail
| Property | Value |
| Width in modular spacing: | 4 |
| Mounting type: | REG |
| Number of outputs: | 2 |
| Output power: | 0 to 300 W |
| Voltage: | 230 V |
| Frequency: | 50 Hz |
| Design: | Dimmer actuator |
| Load type: | universal and LED retrofit |
| Protection class (IP): | IP20 |
| Power supplement usable: | no |
| KNX bus system: | yes |
| Radio bus system: | no |
| Powernet bus system: | no |
| With bus connection: | yes |
| LON bus system: | no |
| Other bus systems: | without |
| Extension input: | no |
| Local/manual operation: | no |
| With LED display: | yes |
| Max. Control current: | 1300 mA |
| Parallel operation possible: | no |
| KNX radio bus system: | no |
| Removable bus module: | no |
| Bidirectional radio: | no |
