SIPLUS S7-1500 DQ 16x24VDC HF TX RAIL based on 6ES7522-1BH01-0AB0 with conformal coating, -40.+70°C, OT4 with ST1/2 (+85°C for 10min), digital output module, 16 channels in groups of 8, 4A per group, single channel diagnostics, substitute value SIMATIC ET 200MP is a modular, scalable and universally applicable I/O system in IP20 and offers the same system advantages as the S7-1500. It allows the shortest bus cycle times and the fastest response times even with large quantities. The decentralized I/O system is particularly easy to install, wire and commission. The scalable design allows you to tailor the I/O station precisely to the respective requirements on site. Like the CPU, the digital output modules are also protected against extreme environmental conditions. Thanks to the 100% conformal coating, they resist biological, chemical and mechanically active substances, condensation, frost and harmful gases. No matter what the conditions - your digital signals are output reliably.
| Property | Value |
| Number of digital outputs: | 16 |
| Redundancy capability: | yes |
| Output current: | 0.5 A |
| Supply voltage for DC: | 20.4 to 28.8 V |
| Height: | 147 mm |
| Width: | 35 mm |
| Depth: | 129 mm |
| Type of supply voltage: | DC |
| Type of output voltage: | DC |
| Permissible voltage at the output: | 0 to 28.8 V |
| Suitable for safety functions: | no |
| Delay time for signal change: | 0.1 ms |
| Short-circuit protection, outputs available: | yes |
| Associated equipment (Ex ia): | no |
| Associated equipment (Ex ib): | no |
| Digital outputs configurable: | yes |
