SIMATIC ET 200MP. PROFINET IO device interface module IM 155-5 PN HF, for ET 200MP electronic modules up to 12 IO modules without PS up to 30 IO modules with additional PS integrated 2PORT switch RJ45 shared device MRP IRT >=0.25ms isochronous mode FW update I&M0...3 prioritized startup, S2 redundancy shared device with 4 SIMATIC ET 200MP controllers. PROFINET IO device interface module IM 155-5 PN HF, for ET 200MP electronic modules, up to 12 IO modules without PS, up to 30 IO modules with additional PS, integrated 2PORT switch, RJ45 shared device, MRP, IRT >=0.25ms, isochronous firmware update, I&M0...3, prioritized startup, S2 redundancy, shared device with 4 controllers The SIMATIC ET 200MP is a modular, scalable and universally applicable I/O system in IP20 and offers the same system advantages as the S7-1500. It allows the shortest bus cycle times and the fastest response times even with large quantities. The decentralized I/O system is particularly easy to install, wire and commission. Thanks to the scalable design, you can tailor the peripheral station precisely to your specific on-site needs. Interface modules connect SIMATIC ET 200MP with PROFINET or PROFIBUS and exchange data between the higher-level controller and the peripheral modules.
Property | Value |
Height: | 147 mm |
Width: | 35 mm |
Depth: | 129 mm |
Type of supply voltage: | DC |
Degree of protection (IP): | IP20 |
Suitable for safety functions: | no |
Rack mounting possible: | yes |
IO-Link Master: | no |
Supply voltage for DC: | 19.2 to 28.8 V |
Wireless standard WLAN 802.11: | no |
Wall/direct mounting possible: | no |
Front installation possible: | yes |
Wireless standard Bluetooth: | no |
System component: | yes |
With electrical isolation: | yes |
Field bus connection via separate bus coupler possible: | no |
Mounting rail mounting possible: | yes |
Associated equipment (Ex ia): | no |
Associated equipment (Ex ib): | no |
Supports protocol for AS-Interface Safety at Work: | no |
Supports protocol for SERCOS: | no |
Supports protocol for CAN: | no |
Supports protocol for KNX: | no |
Supports protocol for EtherNet/IP: | no |
Supports protocol for MODBUS: | no |
Supports protocol for other bus systems: | no |
Supports protocol for PROFINET CBA: | no |
Supports protocol for Foundation Fieldbus: | no |
Supports protocol for Data-Highway: | no |
Supports protocol for ASI: | no |
Supports protocol for PROFIsafe: | yes |
Supports protocol for DeviceNet: | no |
Supports protocol for SUCONET: | no |
Supports protocol for LON: | no |
Supports protocol for DeviceNet Safety: | no |
Wireless standard GPRS: | no |
Wireless standard GSM: | no |
Supports protocol for PROFIBUS: | no |
Supports protocol for SafetyBUS p: | no |
Supports protocol for INTERBUS: | no |
Supports protocol for INTERBUS-Safety: | no |
Supports protocol for PROFINET IO: | yes |
UMTS radio standard: | no |