SIMATIC S7-1500, digital output module DQ16xDC 24V/0.5A HF, 16 channels in groups of 8, 4A per group, single-channel diagnostics, substitute value: switching cycle counter for connected actuators. Module supports the safety-related shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. Order front connector (screw terminals or push-in) separately SIMATIC ET 200MP is a modular, scalable and universally applicable I/O system in IP20 and offers the same system advantages as the S7-1500. It allows the shortest bus cycle times and fastest response times even with large quantity structures. The decentralized I/O system is particularly easy to install, wire and put into operation. The scalable design allows you to tailor the peripheral station precisely to the specific needs on site. The scalable configuration of an ET 200MP station is guaranteed by the comprehensive range of signal modules. Numerous digital and analog input and output modules are available. This guarantees the universal application of the system.
| Property | Value |
| Number of digital outputs: | 16 |
| Redundancy capability: | yes |
| Output current: | 0.5 A |
| Supply voltage for DC: | 19.2 to 28.8 V |
| Height: | 147 mm |
| Width: | 35 mm |
| Depth: | 129 mm |
| Type of supply voltage: | DC |
| Type of output voltage: | DC |
| Permissible voltage at the output: | 0 to 28.8 V |
| Suitable for safety functions: | no |
| Delay time when signal changes: | 0.1 to 0.5 ms |
| Short-circuit protection, outputs present: | yes |
| Associated equipment (Ex ia): | no |
| Associated equipment (Ex ib): | no |
| Explosion protection category for gas: | ATEX gas explosion protection, cat. 3G |
| Digital outputs configurable: | yes |
