TPRI connection module with relay 110V AC, output 8 make contacts DC 24 V/0.05 A Type: push-in terminal with LED, PU = 1 piece 16-pin IDC connection for cable The TPRi relay connection module with relay for connecting 8 digital input signals (110VAC) and potential feed terminals (24VDC). For potential adjustment to 24VDC input signal. With push-in terminals and LED for signaling, it forms the interface between the connection cables of the I/O brought in from the field and the SIMATIC S7. This is mounted on the DIN rail and, thanks to its functionality with push-in terminals, is precisely adapted to the respective task. This connection module is part of the fully modular connection of SIMATIC TOP connect for the fastest and safest system cabling. In addition to low wiring effort, sources of error in cabling can be significantly reduced. Sensors from the periphery are connected to the connection modules of SIMATIC TOP connect and connected to the SIMATIC S7-300/1500 via a connecting cable and front connector module.
| Property | Value |
| Connectable conductor cross-section, finely stranded with wire end ferrule: | 0.199999999 to 2.5 mm² |
| Connectable conductor cross-section, finely stranded without wire end ferrule: | 0.199999999 to 2.5 mm² |
| Rated current In: | 1 A |
| Connectable conductor cross-section, stranded: | 0.199999999 to 2.5 mm² |
| Operating temperature: | 0 to 60 °C |
| Rated voltage: | 50 V |
| Number of levels: | 1 |
| Design of electrical connection 1: | Plug connection |
| Design of electrical connection 2: | Penetration connection |
| Flammability class of the insulating material according to UL 94: | V1 |
| End plate required: | no |
| LED switching for: | PNP |
| With PE connection: | no |
| With shield connection: | no |
| With feed-in function: | yes |
| Number of terminal points per level: | 1 |
| Levels bridged internally: | no |
| Can be connected crosswise: | no |
| Separation function: | no |
| Explosion-tested version 'Ex e': | no |
