SINAMICS G120 Power Module PM 240-2 with integrated class A filter with integrated brake chopper 3AC500-690V+10/-20% 47-63Hz High overload power: 18.5kW at 200% 3S, 150% 57S, 100% 240S, ambient temperature -20 to +50°C (HO), Low overload power: 22kW at 150% 3S, 110% 57S, 100% 240S, ambient temperature -20 to +40°C (LO) 472x 200x 237 (HxWxD), FSD protection class IP20 without control unit and operating unit released from CU firmware version V4.7 HF8 Power Module SINAMICS Power Module PM240-2 the ideal power module for Standard applications in mechanical engineering for the modular frequency converter SINAMICS G120. As part of the modular frequency converter SINAMICS G120 (consisting of power unit, control unit, operator panel), the PM240-2 Power Modules (protection class IP20) have a brake chopper (four-quadrant applications) and are suitable for a wide range of applications in general mechanical engineering. The PM240-2 power unit can be flexibly combined with various control units depending on the scope of the application and safety requirements (e.g. STO, SS1, SBC, SLS, SDI, SSM). In combination with the CU230-2, CU240x-2 and CU250S-2 control units, the functional SINAMICS G120 frequency converter is created. The PM240-2 with protection class IP20 is a built-in device for the control cabinet with a power range from 0.55 kW to 250 kW, as well as three voltage variants 200 V, 400 V and 690 V. The power modules are available unfiltered or with an integrated Class A line filter and in seven sizes from FSA to FSG. For optimal dissipation of waste heat outside the control cabinet, the power unit is also available as a push-through variant. The sizes also offer Safety Integrated. Due to the robust design, cable lengths of up to 450 meters (size FSF/FSG) can be achieved. Shield plates and shield connection sets are available for EMC-compliant wiring. SINAM
| Property | Value |
| Protection class (IP): | IP20 |
| Mains voltage: | 500 to 690 V |
| Max. Output frequency: | 550 Hz |
| Use in industrial areas permitted: | yes |
| Height: | 472 mm |
| Width: | 200 mm |
| Depth: | 237 mm |
| Type of converter: | U-converter |
| Max. output power with linear load at rated output voltage: | 18.5 kW |
| 4-quadrant operation possible: | no |
| Relative symmetrical mains voltage tolerance: | 10 % |
| Integrated brake chopper: | yes |
| Number of input phases: | 3 |
| Permitted for use in residential and commercial areas: | no |
| Relative symmetrical mains frequency tolerance: | 5 % |
| Number of output phases: | 3 |
| Max. output power at square load at rated output voltage: | 22 kW |
| Nominal output current I2N: | 27 A |
