SINAMICS V20 3AC 380-480V -15/+10% 47-63Hz Rated power 0.55kW with 150% overload for 60 sec. unfiltered I/O: 4 DI, 2 DO, 2 AI, 1 AO Fieldbus: USS/MODBUS RTU with built-in BOP Protection: IP20/ UL open Size: A 90x150x146 (WxHxD) Frequency converter SINAMICS V20. Simple. Robust. Efficient. For industrial applications and commercial applications in the voltage range 3AC 380 V to 480 V. SINAMICS V20 is characterized by short commissioning times, simple operation, robustness and cost-effectiveness. The converter can be operated straight out of the packaging without additional modules. To increase energy efficiency, the converter is equipped with an energy-optimized control method with automatic flux reduction. It also shows the current energy consumption and has other integrated energy-saving functions. The keep-running mode enables stable operation even under difficult and fluctuating network conditions. The converter is available in nine sizes in a power range from 0.12 kW to 30 kW for operation on single-phase and three-phase networks (1AC 200 V to 240 V, 3AC 380 V to 480 V). The SINAMICS V20 can be individually adapted to the requirements of the application using various options, such as a local Basic Operator Panel (BOP) or mobile SINAMICS V20 Smart Access Module, BOP interface, standard network cable, line filter, braking resistors, shielding, etc. It also enables simple system configuration with predefined macros in the converter and ready-made function blocks from the Totally Integrated Automation Portal (TIA Portal) for quick connection, for example, to a SIMATIC S7-1200 controller. The SINAMICS V20 basic converter is a technical and economical alternative to the Micromaster 420 frequency converter. SINAMICS - simply my drive.
| Property | Value |
| Protection class (IP): | IP20 |
| Mains voltage: | 380 to 480 V |
| Number of other HW interfaces: | 1 |
| Number of serial RS-485 HW interfaces: | 1 |
| Max. Output frequency: | 550 Hz |
| Use in industrial areas permitted: | yes |
| Height: | 150 mm |
| Width: | 90 mm |
| Depth: | 145.5 mm |
| Type of converter: | U-converter |
| Max. output power with linear load at rated output voltage: | 0.55 kW |
| Supports protocol for data highway: | no |
| 4-quadrant operation possible: | no |
| With optical interface: | no |
| Supports protocol for LON: | no |
| Relative symmetrical mains voltage tolerance: | 10 % |
| Supports protocol for AS-Interface Safety at Work: | no |
| Brake chopper integrated: | no |
| Number of input phases: | 3 |
| Supports protocol for TCP/IP: | no |
| Supports protocol for DeviceNet: | no |
| Supports protocol for PROFINET IO: | no |
| Supports protocol for PROFIBUS: | no |
| Supports protocol for EtherNet/IP: | no |
| Supports protocol for INTERBUS-Safety: | no |
| Supports protocol for SUCONET: | no |
| Supports protocol for CAN: | no |
| Supports protocol for KNX: | no |
| Permitted for use in residential and commercial areas: | no |
| Supports protocol for INTERBUS: | no |
| Number of HW interfaces serial RS-232: | 1 |
| Supports protocol for other bus systems: | yes |
| Supports protocol for ASI: | no |
| Supports protocol for SafetyBUS p: | no |
| Supports protocol for MODBUS: | yes |
| Supports protocol for PROFIsafe: | no |
| Supports protocol for DeviceNet Safety: | no |
| Relative symmetrical mains frequency tolerance: | 5 % |
| Supports protocol for SERCOS: | no |
| Number of output phases: | 3 |
| Supports protocol for PROFINET CBA: | no |
| Supports protocol for Foundation Fieldbus: | no |
| Max. delivered power at square. Load at rated output voltage: | 0.55 kW |
| With PC connection: | no |
| Nominal output current I2N: | 1.7 A |
| Max. output voltage: | 480 V |
| Number of analog outputs: | 1 |
| Number of analog inputs: | 2 |
| Number of digital inputs: | 4 |
