SINAMICS V90 Input voltage: 3AC 200-240V -15%/+10% 12.0A 45-66Hz Output voltage: 0-input V 11.6A 0-330Hz Motor: 2kW Protection class: IP20 FRAME size D, 95x 170x 195 (WxHxD) Servo converter SINAMICS V90 the performance-optimized and easy-to-use servo drive system for a wide range of motion control tasks with a focus on dynamic movement and processing. The drive system consists of the servo converter SINAMICS V90 and the servo motor SIMOTICS S-1FL6. The cost-effective servo drive system is characterized by reliable operation, optimized performance and easy handling. With the SIMATIC controller it forms a strong team in the TIA Portal (V14). Depending on the version, the free SINAMICS V-ASSISTANT commissioning tool can be downloaded for quick and easy commissioning. The SINAMICS V90 servo converter is suitable for operation on single-phase and three-phase networks and, with four sizes, covers a power range from 0.1 kW to 2.0 kW and a voltage range from 200 V to 240 V. The system can be easily integrated via PTI, PROFINET, USS and Modbus RTU. The SINAMICS V90 servo converter can be individually adapted to the user's requirements using various options such as connection cables, line filters, plug connections and other accessories. SINAMICS - the universal drive family for every application area.
| Property | Value |
| Protection class (IP): | IP20 |
| Mains voltage: | 200 to 240 V |
| Number of serial RS-485 hardware interfaces: | 1 |
| Use in industrial areas permitted: | no |
| Height: | 170 mm |
| Width: | 95 mm |
| Depth: | 195 mm |
| Type of converter: | U converter |
| Supports protocol for data highway: | no |
| 4-quadrant operation possible: | yes |
| Supports protocol for LON: | no |
| Relative symmetrical mains voltage tolerance: | -15 % |
| Supports protocol for AS-Interface Safety at Work: | no |
| Brake chopper integrated: | yes |
| Number of input phases: | 3 |
| Supports protocol for TCP/IP: | no |
| Supports protocol for DeviceNet: | no |
| Supports protocol for PROFINET IO: | yes |
| Supports protocol for PROFIBUS: | no |
| Supports protocol for EtherNet/IP: | no |
| Supports protocol for INTERBUS Safety: | no |
| Supports protocol for SUCONET: | no |
| Supports protocol for CAN: | no |
| Supports protocol for KNX: | no |
| Use in residential and commercial areas permitted: | yes |
| Supports protocol for INTERBUS: | no |
| Supports protocol for other bus systems: | no |
| Supports protocol for ASI: | no |
| Supports protocol for SafetyBUS p: | no |
| Supports protocol for MODBUS: | yes |
| Supports protocol for PROFIsafe: | no |
| Supports protocol for DeviceNet Safety: | no |
| Relative symmetrical mains frequency tolerance: | -15 % |
| Supports protocol for SERCOS: | no |
| Number of output phases: | 3 |
| Supports protocol for PROFINET CBA: | no |
| Supports protocol for Foundation Fieldbus: | no |
| Number of HW interfaces USB: | 1 |
| With PC connection: | yes |
| Nominal output current I2N: | 11.6 A |
| Max. Output voltage: | 212 V |
| Number of analog outputs: | 2 |
| Number of analog inputs: | 2 |
| Number of digital outputs: | 6 |
| Number of digital inputs: | 10 |
| Supports protocol for BACnet: | no |
