SINAMICS G120D Power Module PM250D with integrated class A filter, energy recovery capability 3AC380-480V+10/-10% 47-63Hz Power high overload: 0.75kW at 200% 3S, 150% 60S, 100% 300S Ambient temperature -10 to +55°C 210x 450x 110 (HxWxD), FSA Protection class IP65 without Control Unit Power Module SINAMICS Power Module PM250D for the decentralized converter SINAMICS G120D. Due to the regenerative capability of the Power Module PM250D in generator mode (electronic braking), energy is fed back into the network and not converted into heat in a braking resistor. This saves energy, space, the complex design of the braking resistor and its wiring. The heat generated is also reduced. Innovative circuit technology also ensures fewer harmonics in the network. A mains choke is no longer required, which saves space and effort in project planning and procurement. The PM250D Power Module is also suitable for use in safety-related applications; in conjunction with a fail-safe control unit, the drive becomes a Safety Integrated Drive. The PM250D Power Modules are available in sizes FSA to FSC in a three-phase voltage range from 380 V to 500 V and in a power range between 0.75 kW and 7.5 kW. These PM250D Power Modules with integrated Class A mains filter are suitable for connection to TN and TT networks. SINAMICS - the consistent drive family for every application area.
| Property | Value |
| Mains voltage: | 380 to 500 V |
| Max. Output frequency: | 650 Hz |
| Use in industrial areas permitted: | yes |
| Height: | 210 mm |
| Width: | 445 mm |
| Depth: | 110 mm |
| Type of converter: | U-converter |
| Max. output power with linear load at rated output voltage: | 0.75 kW |
| 4-quadrant operation possible: | yes |
| Relative symmetrical mains voltage tolerance: | -10 % |
| Integrated brake chopper: | yes |
| Number of input phases: | 3 |
| Use in residential and commercial areas permitted: | no |
| Relative symmetrical mains frequency tolerance: | 10 % |
| Number of output phases: | 3 |
| Max. output power at square load at rated output voltage: | 0.75 kW |
| Nominal output current I2N: | 2.2 A |
