Somfy 1818210 Soliris Sensor RTS LED

Soliris Sensor RTS transmits the signals wirelessly. This eliminates the need for any wiring to the control or drive.
It only requires a 230 V connection

It can be adapted to all installation situations thanks to the adjustable joint.
The wind and sun sensor must be installed where the wind sensor can measure the wind and the solar radiation can be measured without interference. The awnings are extended or retracted depending on the current wind and sun conditions.

Wind automation: The wind and brightness threshold is simply set on the control unit. If the set threshold for wind is exceeded, the awning is retracted. If the value falls below this value again, the sun automation is released again after 12 minutes.

Sun automation: The Soliris Sensor RTS continuously measures the current light intensity. If the set threshold value for sun is exceeded for a long time, the awning/blind will be extended or lowered after 2 minutes. If the threshold value is not reached for a long time, the awning/blind will be retracted or raised with a delay of 15-30 minutes. The delay time is longer the more often sun and shade alternate. This avoids frequent movement. The sun control function depends on the respective receiver

Features:

• Measurement of wind speed and sun intensity via combined wind-sun sensor
• Sun control can be switched on and off with Telis Soliris RTS
• LED display when wind or sun threshold is exceeded
• Wireless communication with the radio drive or radio receiver
• Easy programming via a button on the sensor
• Easy setting of the wind and brightness threshold on the sensor
• Demo mode for time-saving function testing
• Only requires a 230 V connection

Technical data:

• Operating voltage: 220-240V~ 50/60 Hz
• Operating temperature: -20°C to +50°C
• Housing protection class: IP 34
• Protection class: II
• Radio frequency: 433.42 MHz
• Brightness setting range: 0-50 kLux
• Wind setting range: 10-50Km/h